Modular zero-point clamping system and multiple clamping system in combination
2019-08-28 10:56 | 131 calls
First set-up:
#Zero-point clamping system and #multiple clamping system from AMF in combination - fixture and workpiece changes in seconds.
The #multiple clamping bar is clamped exactly on the #clamping station by means of pull-studs.
Fitting holes for later holding zero point pull-studs are drilled into the two clamped workpieces in the first clamping of dowel holes. In this way, the workpieces can be completely finished with a 5-sided machining process by means of #zero-point clamping technology.
The workpiece and entire engine room are cleaned fully automatically by the AMF cleaner. Thus, expensive and time-consuming cleaning by the machine operator is fully eliminated.
Reduce your set-up times and increase your #productivity with the combination of different clamping systems and the benefits of AMF zero-point clamping technology.
Second set-up:
A #zero-point clamping system from the module kit. The modular zero-point clamping system from AMF allows a workpiece change on the machine table in seconds.
The adapter clamping module together with the base element is clamped onto the clamping station K20 by means of pull-studs. The workpiece is then clamped to the clamping module K5 with indexing with #direct clamping of the workpiece by means of pull-studs and ready milled in a 5-sided machining process.
The workpiece and entire engine room are cleaned fully automatically by the AMF cleaner. Thus, expensive and time-consuming cleaning by the machine operator is fully eliminated.
Reduce your set-up times and increase your #productivity with the combination of different clamping systems and the benefits of AMF zero-point clamping technology.
More #clamping technology from AMF:
https://www.amf.de