502,393 active members
7,637 visitors online
Register for free
Login Register
Assfalg Products
Demagnetizing plate ENTMAG-P
Demagnetizing plate ENTMAG-P
Demagnetizing plate
Assfalg GmbH
Demagnetizing devices
Demagnetizing plate ENTMAG-P
ENTMAG demagentizing plates are a simple and cost-effective solution for the demagnetization of single and series parts of small and medium size. The devices demagnetize up to a maximum distance of 60 mm. The work pieces are demagnetized either as single units fed by hand or conveyor. Clusters are to be avoided.


Applications

- Neutralization of interfering residual magnetism
- Demagnetizing is terminated after leaving the plate at a distance of appr. 300 mm


Features

- Robust, humidity-proof design (V2A-case)
- Suitable for work pieces made of soft and medium-hard material. High-grade hardened,
intricate parts are recommended to be tried out before
- All operating voltages at 50Hz or 60Hz are deliverable (lower frequency or pulse recurrence
frequency for problematic cases)
- Connecting line, 2 m long, with plug connector
- Type 17 designed for incorporation in belt conveyors (flow-line production)
- Conveying rate for demagnetizing
  • EDS 200
  • EDH 123
Product details Homepage Datasheet Product request
Tunnel demagnetizer ENTMAG-T
Tunnel demagnetizer ENTMAG-T
Tunnel demagnetizer
Assfalg GmbH
Demagnetizing devices
Tunnel demagnetizer ENTMAG-T
ENTMAG-T tunnel demagnetizers enable simple and fast demagnetization of ferromagnetic small and large-number parts. The work piece is moved through the inner space of the tunnel by hand, chute or free fall. Demagnetizing is terminated only after leaving the plate at a distance of appr. 300mm. The work pieces are recommended to be demagnetized one by one. Clusters are to be avoided.


Applications

- Preferred for demagnetization of small and large-number parts.
- The penetration depth into the work piece amounts to appr. 6mm. The layer thickness with
large-number parts must not exceed 6 mm.


Features

- Robust, humidity-proof design
- Type 163: Suitable for work pieces made of soft material. Type 164: Suitable for work pieces made of
medium hard material. Special: High-grade hardened, intricate parts are recommended to be tried
out before.
- All operating voltages at 50Hz or 60Hz are deliverable (lower frequency or pulse recurrence
frequency for problematic cases).
- All effective widths NB are deliverable from 150 to 800 mm.
- Demagnetization can penetrate deeper than 0.5 mT (5 Gauss). Test: Iron filings must not adhere on
the work piece.
Product details Homepage Datasheet Product request