502,393 active members
8,255 visitors online
Register for free
Login Register
Assfalg Products
EPMradial
EPMradial
Round Magnetic Chuck
Assfalg GmbH
Magnetic chucks
EPMradial
65047, 63541
These Electropermanent Magnetic Chucks are ideal for clamping distortionfree big discs, rings or bearings for windmills. Even hardened rings can be finished best. Centric holes or through holes can be drilled. All the advantages of fixed and mobile pole extensions of Magnaslot can be used, to reach best surface quality.

Application:

- Universal use for clamping ferromagnetic workpieces, particularly on lathes and rotary table grinding machines
- Ideal for bearing ring processing, also for hard processing

Professional advantages:

- Extremely short set-up times due to simple and fast clamping of workpieces
- 5-side machining with less stress, less torsions, less vibrations by means of fixed and mobile pole extensions
- No damages to the magnetic chuck by breakouts or through machining, if pole extensions are used
- Sensible magnet power adjustment for thin workpieces or for aligning

Features:

- Extremely high magnetic power with activation within seconds
- Through holes, poleshoes without or with T-slots, fixed and mobile pole extensions for ease of clamping and machining
- The shielded and protected cable from the controller can be connected to the chuck by bayonet or slipring. The chuck controller can be integrated in CNCmachine controller
Product details Homepage Datasheet Product request
Neostar
Neostar
Round Magnetic Chucks
Assfalg GmbH
Magnetic chucks
Neostar
The Neostar is a very strong round Permanent Magnetic Chuck with radial pole pitch. It is manually switched. It is designed for ferromagnetic discs, rings and cylindric workpieces with approx. 80 mm diameter and more. A through hole in the center can be drilled.

Application:
- Universal use, particularly for internal and external grinding of cylinders, turning and hard turning
- Excellently suitable for clamping rings

Features:
- Liquid-tight
- Can be switched ON/OFF mechanically
- The center is not magnetic and can be drilled through up to the dia. “C”
- Workpieces can be clamped stress-free and fast
- All-around processing as only one side is clamped magnetically
- High power and flat magnetic field (penetrates max. 10mm into workpiece)
- Adhesive force: up to 140 N/cm2
Product details Homepage Datasheet Product request
Permamax
Permamax
Round Magnetic Chuck
Assfalg GmbH
Magnetic chucks
Permamax
The round Permamax is a very strong Permanent Magnetic Chuck with parallel pole pitch. It is manually switched. It is universally suitable for all kind of ferromagnetic workpieces.

Application:

- Universal use, also for small workpieces
- Best suitable for flat grinding, internal or external grinding or turning or hard turning

Features:

- High power and liquid-tight
- The surface can be machined down by 2mm and partially drilled up to 8 mm depth (5 mm at D ≤ 130 mm)
- Mechanically switchable
- Workpieces can be clamped stress-free and fast
- All-around processing as only one side is clamped magnetically
- Adhesive force: up to 140 N/cm2 with pole pitch 12 + 3 mm
Product details Homepage Datasheet Product request