502,393 active members
6,118 visitors online
Register for free
Login Register
Assfalg Products

Workpiece and tool handling

Elift
Elift 300
Permanent Lifting Magnet
Assfalg GmbH
Lifting magnets
Elift
50871, 34858, 34859, 34860, 34862, 43161, 42037
The unmistakable advantages of the lifting magnets Elift from Assfalg are economy and fast handling. The hand-operated Permanent Lifting Magnet is the perfect and fully developed solution for moving all ferromagnetic materials in an efficient, safe and reliable way.


Application

- For flat and round material, because of v-prism pole shoe
- Selected lifter size according to load and for easy operation of the switching level
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, transport company or materials store


Professional advantages

- Absolutely safe lifting - with 3-times safety factor(the pull-off strength is 3 times more as the recommended lifting force)
- No restrictions on scaled, rough or oily surfaces
- No damaging of the workpiece surface
- Smooth switching ON/OFF via hand lever
- Optimization of crane capacity and space because of independent permanent magnet lifter
- Smooth lever more when switching OFF provided correct lifter size was selected


Features

- Two-hand operation via hand lever and safety lock
- Max. operation temperature 80°C
- Use of durable and extremely strong neodymium magnet materials
- Compact, sturdy construction, low dead weight
  • Elift 300
  • Elift 500
  • Elift 500
  • Elift vertical transport
  • Elift at traverse
  • Elift 5000
Product details Homepage Datasheet Product request
Manual sorting magnet HSM ECO
 Manual sorting magnet HSM ECO
Magnetising equipment
Assfalg GmbH
Magnetising equipment
Manual sorting magnet HSM ECO
The manual sorting magnet is preferably used for separating of bulk material and lifting of small parts such as bolts, nuts, nails or chips.


Features

- Cost-effective
- Longevity
- Light-weight and compact design


Application

- For holding of small parts
Product details Homepage Datasheet Product request
AY Series - Magnetic gripper for automation
M15AY
Workpiece and tool handling
Assfalg GmbH
Handling equipment for aligning and positioning of workpieces
A highly technical tool series that allows maximum saturation (performance) on thin material. Array units ("AY") offer increased power in a compact, single actuator package. These units are suited to sheet handling on the fly or in shear. This is a revolutionary automation tool that for the first time, truly challenges suction systems while delivering fast payback on the initial investment. Units can be specified for deep field (JSC) or shallow field (ASC) operation.


Application

- For thin workpieces: AY-ASC with a flat magnetic field
- For thick workpieces: AY-ISC with a deep magnetic field
- Suitable for automation, lifting operations, robotics technology, welding and clamping technology


Features

- Very thin sheets up to 0,5 mm can be separated from the stack
- Absolutely safe lifting – namely with 4-times safety (the pull-off strength is 4 times of the recommended lifting force)
- Very light and very heavy workpieces can be grabbed
- Compact and stable
- Very low residual magnetism
  • M15AY MAgnetic Gripper
  • M15AY Automation
  • M15AY
Product details Homepage Datasheet Product request
Demagnetizing plate ENTMAG-P
Demagnetizing plate ENTMAG-P
Demagnetizing plate
Assfalg GmbH
Demagnetizing devices
Demagnetizing plate ENTMAG-P
ENTMAG demagentizing plates are a simple and cost-effective solution for the demagnetization of single and series parts of small and medium size. The devices demagnetize up to a maximum distance of 60 mm. The work pieces are demagnetized either as single units fed by hand or conveyor. Clusters are to be avoided.


Applications

- Neutralization of interfering residual magnetism
- Demagnetizing is terminated after leaving the plate at a distance of appr. 300 mm


Features

- Robust, humidity-proof design (V2A-case)
- Suitable for work pieces made of soft and medium-hard material. High-grade hardened,
intricate parts are recommended to be tried out before
- All operating voltages at 50Hz or 60Hz are deliverable (lower frequency or pulse recurrence
frequency for problematic cases)
- Connecting line, 2 m long, with plug connector
- Type 17 designed for incorporation in belt conveyors (flow-line production)
- Conveying rate for demagnetizing
  • EDS 200
  • EDH 123
Product details Homepage Datasheet Product request
ELM
ELM
Lifting Magnet
Assfalg GmbH
Lifting magnets
ELM
41616, 41617, 41618, 41619, 27979
The manually switchable lifting magnet is a very good solution for moving all ferromagnetic materials (ferrous materials) in an efficient, fast, safe and economic way.

Application:

- For flat and round material, as the magnetic adhesive surface is provided with a prism pole shoe.
- For thin and thick sheets depending on the magnet size
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, transport company or materials store

Features:

- Smooth two-hand operation via hand lever and safety locking
- Max. operation temperature 80°C
- Absolutely safe lifting, as the recommended lifting force is secured 3 times (the pull-off strength is 3 times the recommended lifting force)
- Use of durable and extremely strong Neodym magnet materials
- Compact, sturdy construction, low dead weight

Options:

- Services: Test according to German
- Accident Prevention Regulations and repair
  • ELM Application
Product details Homepage Datasheet Product request
EPM B - Series
EPM B 5000
Electropermanent Battery Lifting Magnet
Assfalg GmbH
Lifting magnets
EPM B - Series
The Electropermanent Battery Lifting Magnets can be used without connection to the power supply. They combine safety of permanent magnets with the operation comfort of electromagnets. Sheets from 6mm thickness can also be separately lifted from stack. Even magnetizing and demagnetizing of the lifting magnet can take place automatically.


Application

- For flat and round material because v-prism pole shoe
- Operation is independent from mains supply
- Usable even for beam operation with 2 magnets
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding,
steel mill, cutting-, laser operation, transport company or materials store


Professional advantages

- Automatic magnetizing and demagnetizing of the workpiece by AUTO mode
- 3 times safety factor and additional safety feature to drop accidentially the load in the air
- Scaled or rough surface can be mastered
- No current flow during lifting - the magnet is magnetized or demagnetized by pulse current only
- Usable in multi-shift operations, because approx. 300 switches are possible


Features

- Selection between manual or automatic mode
- Max. operation temperature 80°C
- Optical and acoustic alarm device with battery charge level indicator
- Inching for destacking is possible either by power reduction button or by optional wireless remote control
- 300 operation cycles before recharging 8h by mains supply of 110V / 230V
  • EPM B 5000
  • EPM B 300L
  • EPM B 5000
  • EPM B 5000
  • EPM B 10000
  • EPM B 300L
  • EPM B 300L
Product details Homepage Datasheet Product request
EPM H Series
EPM H10
Lifting magnets
Assfalg GmbH
Lifting magnets
EPM H Series
auf Anfrage
Electropermanent Lifting Magnet

EPM H is for lifting and transporting heavy ferrite blocks or slaps, even with rough surface. The casing is sturdy and equipped with alarm lamp and sound. The square pole technology guarantees a bigger force concentration in the workpiece and bridges airgaps.


Professional advantages

- Unsensitive to rusty or rough workpiece surface
- Low energy consumption because of pulse current for switching
- No drop of workpiece, when power supply fails


Features

- Integrated controller for power supply 40V / 50-60Hz / 32A
- With tower lamp for indicating ON or OFF
- With buzzer for picking up mode
- Max. load dimension 6 m x 2 m
Option:
- radio remote control
- customized application
  • EPM H10
  • EPM H10
  • EPM H10
  • EPM H10
Product details Homepage Datasheet Product request
EPM M-Series
EPM M
Lifting magnets
Assfalg GmbH
Lifting magnets
EPM M-Series
Electropermanent Lifting Magnet
This EPM M magnets are used for frequent handling of workpieces when mains supply is available.
The switching time is rather short. They combine the safety of permanent magnets with the convenience of electromagnets. Only short pulse current is needed for switching, hence energy consumption is very low.


Professional advantages

- Very short switching cycles
- No drop of workpiece when power supply fails
- Mainly maintenance free
- Reduction of power for destacking from 6mm sheet thickness


Features

- Integrated controller for 400V / 50-60Hz / 16A mains supply
- Max. operation temperature 80°C
- Selection of manual mode or automaticmode
Option:
- radio remote control for destacking
- customized applications
  • EPM M
  • EPM M500
  • EPM M1000
Product details Homepage Datasheet Product request
HL 10, HL 20
HL 10, HL 20
small, handy magnet transporter
Assfalg GmbH
Lifting magnets
HL 10, HL 20
104, 25031
The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones.


Application

- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°
- For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force)


Features

- Mechanical release by pushing the handle
- Horizontal or vertical sheet transport
- Destacking of even 2mm sheet thickness
- Very flat magnetic field, especially designed for thin sheets

  • SH-12
Product details Homepage Datasheet Product request
HL 60-CE | HL 60-CE-L
HL 60-CE | HL 60-CE-L
Permanent Magnet Handlifter
Assfalg GmbH
Lifting magnets
HL 60-CE | HL 60-CE-L
The permanent magnet handlifter HL 60-CE is especially designed for hot or sharp edged flamecut parts. It gets magnetized and demagnetized over push buttons on the handle. The HL 60-CE accu lasts for 1000 switching cycles before recharging. The charger and an exchange accu are included. The HL 60-CE-L is with long handle.


Field of Application

- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, transport company or materials store
- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°C
- The workpieces should be clean and dustfree (oil doesn´t effect the magnetic force)


Features

- Magnetizing or demagnetizing by push buttons
- Nearby no residual magnetism, therefore unsensitive to dust or chips
- The electrical switching protects the workpiece surface


Scope of Delivery

- Two batteries for charging
- Battery charger
  • Magnetic hand transporter HL
  • HL 60 - CE 2
  • HL 60 - CE Application 2
  • HL 60-CE-L
Product details Homepage Datasheet Product request
Load Lifting Beams with patented full steel EPMagnet Modules
Lasthebetraverse
Lifting magnets
Assfalg GmbH
Lifting magnets
auf Anfrage
The EPMagnet Modules are switched by mains power supply. They combine the safetyness of permanent magnets with convenience of electromagnets. Sheets from 5mm thickness can be destacked. Magnetizing and demagnetizing of the EPM lifting system can happen manually or by radio remote control. For uneven sheet formats the EPMagnet Modules are equipped with spring suspensions. The EPMagnet modules are integrated in a magnet unit, which is fixed to the beam.


Application

- Especially for sheet lifting
- Destacking by remote control
- For loading or deloading flamecut systems on trucks
- More flexibility with telescopic beams
- For feeding and clearing of flame-cutting-/laser systems, also in multi-shift operation
- Optional: EPMagnet modules for horizontal and vertical transport


Features

- EPM lifting systems is ready for use up to the crane hook
- Power supply is 400V / 50-60Hz / 16A or 32A
- Lamp and buzzer indicates the magnetization and demagnetization process
- Picking up is done with 70% power and automatically increased to 100% after 10 seconds
- Accidential demagnetization during lifting is prevented by ADPREM safety mechanism
- Different magnetic zones can be selected according to sheet size
- Low energy load consumption because of pulse current for switching
- No drop of load when power supply fails



Options

- Customized beam and EPMagnet modules
- Triggering of each EPMagnet module
- Special safety features for automation
- Integration of load cells and magnet flow sensors
  • Heavy lifting
  • Heavy lifting
  • Heavy lifting
  • Heavy lifting
  • Heavy lifting
  • Heavy lifting
  • EPMagnet pole shoe
  • Heavy lifting
Product details Homepage Datasheet Product request
Manual pick-up magnet ELM 100-H
Manual pick-up magnet ELM 100-H
Lifting magnets
Assfalg GmbH
Lifting magnets
Manual pick-up magnet ELM 100-H
These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM
- ELM 100-H > Picking-up of checker plates is possible


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces
Product details Homepage Datasheet Product request
Manual pick-up magnet HCM 2
Manual pick-up magnet HCM 2
Lifting magnets
Assfalg GmbH
Lifting magnets
Manual pick-up magnet HCM 2
These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces
Product details Homepage Datasheet Product request
Manual pick-up magnet HM 1
Manual pick-up magnet HM 1
Lifting magnets
Assfalg GmbH
Lifting magnets
Manual pick-up magnet HM 1
These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces
Product details Homepage Datasheet Product request
Manual sorting magnet HSM
Manual sorting magnet HSM
Workpiece and tool handling
Assfalg GmbH
Magnetising equipment
Manual sorting magnet HSM
The manual sorting magnet is preferably used for separating of bulk material and lifting of small parts such as bolts, nuts, nails or chips.


Features

- Cost-effective
- Longevity
- Light-weight and compact design


Application

- For holding of small parts
  • HSM ECO
Product details Homepage Datasheet Product request
Pick-and-place gripper HELIOS
Pick-and-place gripper HELIOS
Lifting magnets
Assfalg GmbH
Lifting magnets
Pick-and-place gripper HELIOS
These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces
Product details Homepage Datasheet Product request
Pick-and-place gripper PM 1
Pick-and-place gripper PM 1
Lifting magnets
Assfalg GmbH
Lifting magnets
Pick-and-place gripper PM 1
These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces
Product details Homepage Datasheet Product request
SB 950 | SB500 | SB200
SB Serie
Electropermanent battery lifter
Assfalg GmbH
Lifting magnets
SB 950 | SB500 | SB200
60643, 62666, 65697
The electropermanent battery lifting magnets are suitable for the flat material load range of 200kg / 500kg / 950kg and the round material load range of 50kg / 200kg / 400kg. Using a current pulse of less than one second the electropermanent battery lifters SB 200 / SB 500 / SB 950 from Assfalg are switched manually by pushbuttons or automatically. Although no current flows during the transport of the load, the workpiece remains safely clamped like a permanent magnet. Up to 1000 ON/OFF switching cycles by SB 200 / SB 500 and 500 ON/OFF switching cycles by SB 950 are possible before recharging the integrated accu by the supplied mains charger.


Application

- For flat and round material
- Destacking from 4mm sheet thickness by power reduction
- Independent from mains supply
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding,
steel mill, laser-cutting operation, transport company and material store


Professional advantages

- No battery flow during lifting (only a current pulse for a few seconds is required for magnetizing or demagnetizing)
- The magnets are either manually switched via push buttons or automatically via AUTO function
- Power reduction for destacking or low weight loads
- A built in security mechanism prevents switching when the load is suspended
- Option: Positioning drawbar SB 950, swivel-mounted in Z-Axis +/- 60°


Features

- Auto mode is instead of wireless control
- Up to 1000 ON/OFF switching cycles before recharging
- Accu (lithium-ion battery) is charged in approx. 2h mains charger 110V / 230V / 50-60Hz
  • Assfalg Electro-permanent lifting magnet SB500 - Instruction manual
  • SB Series
  • SB 500 heavy lifting
  • SB 200 heavy lifting
  • SB 200
  • SB 500
  • SB 950
Product details Homepage Datasheet Product request
SH 12
SH 12
Magnetic hand transporter
Assfalg GmbH
Lifting magnets
SH 12
101
The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones.


Application

- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°
- For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force)


Features

- Mechanical release by pushing the handle
- Horizontal or vertical sheet transport
- Destacking of even 2mm sheet thickness
- Very flat magnetic field, especially designed for thin sheets

  • SH 12 Anwendung
Product details Homepage Datasheet Product request
SH 35-K, SH 60-K
SH 35-K, SH 60-K
Craneguided magnetic transporter
Assfalg GmbH
Lifting magnets
SH 35-K, SH 60-K
105, 106
Since decades, Crane Transporters of the SH series have been considered to be an economic solution for horizontal or vertical transport by crane. Contrary to other permanent magnet lifters the SH types have a flatter magnetic field especially designed for picking up sheets with 3mm thickness and more. They are a real alternative to mechanical transport clamps, even for support during sheet bending process.


Application

- Suitable for sheets with thickness from 3mm
- Use on clean sheets (oil does not negatively effect magnetism)
- Sheet or plate can be tilted
- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction,
shipbuilding, steel mill, transport company or materials store


Features

- Mechanical release by handle
- Max. operation temperature 80°C


Options

- Service and repair according to safety regulations
- Rope loop for a soft mountening on the crane hook
  • SH 35-H application
Product details Homepage Datasheet Product request
Tunnel demagnetizer ENTMAG-T
Tunnel demagnetizer ENTMAG-T
Tunnel demagnetizer
Assfalg GmbH
Demagnetizing devices
Tunnel demagnetizer ENTMAG-T
ENTMAG-T tunnel demagnetizers enable simple and fast demagnetization of ferromagnetic small and large-number parts. The work piece is moved through the inner space of the tunnel by hand, chute or free fall. Demagnetizing is terminated only after leaving the plate at a distance of appr. 300mm. The work pieces are recommended to be demagnetized one by one. Clusters are to be avoided.


Applications

- Preferred for demagnetization of small and large-number parts.
- The penetration depth into the work piece amounts to appr. 6mm. The layer thickness with
large-number parts must not exceed 6 mm.


Features

- Robust, humidity-proof design
- Type 163: Suitable for work pieces made of soft material. Type 164: Suitable for work pieces made of
medium hard material. Special: High-grade hardened, intricate parts are recommended to be tried
out before.
- All operating voltages at 50Hz or 60Hz are deliverable (lower frequency or pulse recurrence
frequency for problematic cases).
- All effective widths NB are deliverable from 150 to 800 mm.
- Demagnetization can penetrate deeper than 0.5 mT (5 Gauss). Test: Iron filings must not adhere on
the work piece.
Product details Homepage Datasheet Product request
Ultralift TP
Ultralift TP
Lifting Magnet
Assfalg GmbH
Lifting magnets
Ultralift TP
47562, 47563
The manually switchable permanent lifting magnet is perfect solution for moving thin, ferromagnetic materials (ferrous materials) with a material thickness from 5 mm in an efficient, fast, safe, purposeful and economic way.

Application:

- For flat material from 5 mm thickness, also for separating sheets
- Suitable for raw material, semifinished and finished products because of gentle lifting
- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction,
shipbuilding, steel mill, transport company or materials store

Features:

- Single-hand operation via hand lever with integrated safety locking
- Max. operation temperature 80°C
- Neodym magnets for small structural shape and high adhesive force
- Equipped with four poles, therefore larger contact surface and particularly flat magnetic field

Options:

- Services: Test according to German Accident Prevention Regulations and repair
  • Ultralift TP Application
Product details Homepage Datasheet Product request
AR Series - Magnetic gripper for automation
AR 50 Classic
Handling equipment for aligning and positioning of workpieces
Assfalg GmbH
Handling equipment for aligning and positioning of workpieces
The AR permanent magnets are well controlled by air pressure. The rectangular housing is designed for an easy exchange of pole shoes. Special pole shoes are needed for irregular, uneven workpiece forms. The magnets are very flexible because one of three possible magnet areas can be used. This magnet is best choice when no flat area exists.

Application

- For round and flat workpieces
- For workpieces with irregular surfaces
- Suitable for automation, lifting operations, robotics technology, welding and clamping technology


Features

- Each AR device is equipped with a set of flat or tube / round pole shoes
- The exchangeable pole shoes can be adapted individually to the workpiece
- Very low residual magnetism
- Universel in application
- Very light and very heavy workpieces can be grabbed

  • AR 40 Naams
  • Magnetgreifer Automation
  • AR 50 Classic
  • Magnetic Gripper AR Series
Product details Homepage Datasheet Product request
Magnet filter bar EGM
Magnet filter bar EGM
Magnetising equipment
Assfalg GmbH
Magnetising equipment
Magnet filter bar EGM
The magnetic filter bar EGM is used for extracting not only ferrous impurities from bulk material, plastic granulates, grain, corn, flour, food etc.. but also for attracting of fluid materials.
The manual sorting magnet is preferably used for separating of bulk material and lifting of small parts such as bolts, nuts, nails or chips.


Features

- Cost-effective Extremely high adhesive forces with Neodymium-Iron-Boron-magnets
- Low profile
- Very cost-effective permanent magnetfilter for occasional impurities


Applications

- For cleaning of fluids
Product details Homepage Datasheet Product request
Loading ...