AVANTEC
Products
32
AVANTEC Zerspantechnik GmbH
Surface milling tools
Face milling cutters SE45
| 80-160 mm | |
| 45 ° | |
| 8,4 mm | |
| 0,30-0,65 |
- roughing and finishing with the same indexable insert
- SE45 is optimal for long-chipping material
- SE45 is optimal for long-chipping material
Face milling cutter HD60
|
Surface milling tool
AVANTEC Zerspantechnik GmbH
Surface milling tools
| 125-200 mm | |
| 60 ° | |
| 10 mm | |
| 0,30-0,65 mm |
- for universal use in cast iron and steel machining
- excellent surface quality due to wiper geometry
- variable clamping wedge system suitable for long- and short-chipping materials
- excellent surface quality due to wiper geometry
- variable clamping wedge system suitable for long- and short-chipping materials
Face milling cutter KC1.1
|
Face milling cutter
AVANTEC Zerspantechnik GmbH
Surface milling tools
| 50-63 mm | |
| 45 ° | |
| 3,5 mm | |
| 0,22-0,65 mm |
- for universal use in cast iron and steel machining
- excellent surface quality due to wiper geometry
- optimal chip removal through improved cutting edge geometry
- excellent surface quality due to wiper geometry
- optimal chip removal through improved cutting edge geometry
Face milling cutter OE45
|
Face milling cutters
AVANTEC Zerspantechnik GmbH
Surface milling tools
| 63-160 mm | |
| 45 ° | |
| 4,5 mm | |
| 0,22–0,65 mm |
- well suited for the powerful machining of stainless steel materials
- optimal chip removal through improved cutting edge geometry
- all diameters with internal cooling
- optimal chip removal through improved cutting edge geometry
- all diameters with internal cooling
Face milling cutter SE60
|
Face milling cutters
AVANTEC Zerspantechnik GmbH
Surface milling tools
| 125-200 mm | |
| 60 ° | |
| 14 mm | |
| 0,45-0,65 mm |
- up to 14 mm depth of cut for maximum Q
- minimal power consumption, maximum machining performance
- minimal power consumption, maximum machining performance
Face milling cutter SN75
|
Face milling cutters
AVANTEC Zerspantechnik GmbH
Surface milling tools
| 80-200 mm | |
| 75 ° | |
| 5,5 mm | |
| 0,15-0,28 mm |
- Kappa 75° - combinded with the robust cutting edges permit both, high tooth feed rate and excellent surface quality - 8-cutting edge, tangential SN indexable insert
- maximum metal removal rate combined with high process reliability
- maximum metal removal rate combined with high process reliability
Face milling cutter SN87
|
Face milling cutters
AVANTEC Zerspantechnik GmbH
Surface milling tools
| 50-160 mm | |
| 87 ° | |
| 5,0-7,0 mm | |
| 0,14-0,30 mm |
- Kappa 87° - can also be used as shoulder milling cutters
- multi-tooth design with fine pitch optimal for thin-walled parts
- 8-cutting edge, tangential SN indexable insert
- robust and soft cutting
- multi-tooth design with fine pitch optimal for thin-walled parts
- 8-cutting edge, tangential SN indexable insert
- robust and soft cutting
Face milling cutter SX45
|
Face milling cutters
AVANTEC Zerspantechnik GmbH
Surface milling tools
| 80-160 mm | |
| 45 ° | |
| 8,8 mm | |
| 0,30-0,65 mm |
- roughing and finishing with the same indexable insert
- for jobs requiring an increased number of teeth
- for jobs requiring an increased number of teeth
Finishing Cutter EK90
|
face milling cutters
AVANTEC Zerspantechnik GmbH
Surface milling tools
| < 0.005 mm | |
| 90 ° | |
| 63-160 mm | |
| 0,1-0,3 mm |
- highly precise finishing cutters with cartridge system
- simple handling in setting and insert replacement
- extremely high feed rates with 2-cutting edge ENFQ indexable insert
- two indexable insert sizes for low axial impact of compressive forces when machining steel
- simple handling in setting and insert replacement
- extremely high feed rates with 2-cutting edge ENFQ indexable insert
- two indexable insert sizes for low axial impact of compressive forces when machining steel
Finishing cutter SK90
|
face milling cutters
AVANTEC Zerspantechnik GmbH
Surface milling tools
| < 0.005 mm | |
| 90 ° | |
| 100-160 mm | |
| 0,1-0,3 mm |
- highly precise finishing cutters with cartridge system
- simple handling in setting and insert replacement
- excellent surface quality with 4-cutting edge SN indexable insert
- very wide wiper edge for optimum use in cast materials
- simple handling in setting and insert replacement
- excellent surface quality with 4-cutting edge SN indexable insert
- very wide wiper edge for optimum use in cast materials
