Maintenance unit - R 1/2" m. R 3/8" Red.
Maintenance unit large / for oil-operated pneumatic Tools
5-µ-filter
Connection thread: G 1/2" + G 3/8"
Lock: Bayonet coupling
max. operating pressure: 16 bar
Flow rate at 6 bar: 2.800 L/min.
Adjustment range: 0-10 Bar
Tank volume: oiler 125 cm³ / condensate 85 cm³
Filter pore width: 5 µm
Weight: 1,9 kg
Maintenance unit - R 1/4"
Maintenance unit small / for oil-operated pneumatic Tools
5-µ-filter
Connection thread: G 1/4"
Lock: Bayonet coupling
max. operating pressure: 16 bar
Flow rate at 6 bar: 1.300 L/min.
Adjustment range: 0-10 Bar
Tank volume: oiler 50 cm³ / condensate 25 cm³
Filter pore width: 5 µm
Weight: 0,81 kg
Maintenance unit / Water seperator - R 1/4"
for oil-free pneumatic Tools
Filter and pressure regulator without oiler.
5-µ-filter
Connection thread: G 1/4"
Lock: Bayonet coupling
max. operating pressure: 16 bar
Flow rate at 6 bar: 1.700 L/min.
Adjustment range: 0-10 Bar
Tank volume: condensate 25 cm³
Filter pore width: 5 µm
Weight: 0,5 kg
Maintenance Units for oil grinders and dry-running machines
The air quality is very important for the lifetime of pneumatic tools.
It should have the right pressure, it should be clean and free from water and if necessary contain oil.
With our maintenance units you can guarantee that your pneumatic tools get the ideal air quality.
Every pneumatic tool should be used with a maintenance unit.
The advantages of our maintenance units:
- resilient housing
- high air passage
- 5 µm fine filter for highest air qualitiy
- container with bayonet catch for easy opening and closing
(change of the filter and refill of the oil is much easier compared to other maintenance units)
- holder for Installation is included
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.