Flexible shaft - DV 10 rigid

The swivelling bench stand makes working more comfortable.
For drive unit MB 30 E

The portable stand makes workers more mobile when you need to work on large components and when you need to move to different workplaces with the drive unit and flexible shafts attached.
For drive unit MB 30 E

Our friction clutch engages at overload (from 2 Nm) and protects the shafts from ripping. It thus extends shaft lifespans, saves costs and increases occupational safety.

The best MB20 that we have ever had. What?s new?
? Higher speed of up to 34,000 rpm for finer, more precise work.
? The motor is protected from overloading by an automatic cut-out.
? Restart protection provides a high degree of safety.
? Prolonged motor life through optimum dust protection.

Inexpensive to purchase and maintain. Safe to operate.
? Cost-effective universal motor in a sturdy plastic shell.
? Automatic cut-out if wear occurs to the carbon brushes
? Soft start.
? Degree of protection: IP 20, Protection class: II

Specifically designed for versatile use in mould making
? Constant speed under load.
? Uses various quick-change hand pieces for milling, grinding, polishing, brushing and filing.
? The machine can be operated standing upright or suspended from a hook.

The best MB20 that we have ever had. What?s new?
? Higher speed of up to 34,000 rpm for finer, more precise work.
? The motor is protected from overloading by an automatic cut-out.
? Restart protection provides a high degree of safety.
? Prolonged motor life through optimum dust protection.

Inexpensive to purchase and maintain. Safe to operate.
? Cost-effective universal motor in a sturdy plastic shell.
? Automatic cut-out if wear occurs to the carbon brushes
? Soft start.
? Degree of protection: IP 20, Protection class: II

Specifically designed for versatile use in mould making
? Constant speed under load.
? Uses various quick-change hand pieces for milling, grinding, polishing, brushing and filing.
? The machine can be operated standing upright or suspended from a hook.

Milling, grinding, brushing, polishing, filing ? and all with a single device!
This all-rounder is suitable for use in almost all sectors of industry The best results are achieved through digital sensorless control electronics. This ensures:
* Consistently high torque at any speed between 5,000 and 15,000 rev/min.
* Constant speeds at different loads.
* Retrieval of power reserves: at maximum load a remarkable peak power of 1.5 kW. Above this the machine is shut down by the overload protection.
* No pulsation in the low speed range.
* Work results in smoother surfaces. Low maintenance costs and no unnecessary downtime
* The motor is protected from overloading by an automatic cut-out.
* Automatic cut-out if wear occurs to the carbon brushes.
* Fully encapsulated sensorless electronics cannot be clogged with metallic particles.
* Electrical surge protection prevents current peaks and protects the motor. Delivers the highest attainable degree of occupational safety and comfort.

MB 50
* Surface grinding
* Deburring
* Smoothing weld seams 1
* Smoothing weld seams 2
Designed for moderate to severe grinding and milling in tool and mould making, deburring, fettling and brushing work in foundries, container and steel construction, and for mechanical workshops. The lightest and most compact machine in its class for the most difficult applications.
* Unbeatable power to weight ratio with 1.9 kW at 21.7 kg.
* Ultra-strong asynchronous motor (?continuous runner?) with maximum efficiency.
* Indestructible, absolutely maintenance free, virtually no wear.
* Particularly suitable for a large tool diameter.
* Ideal for working large surfaces.
* Motor overload protection.
* Constant speed under load.
* Convenience and safety features.
* A multitude of possible combinations of shafts and handpieces.
* The machine may be operated free standing, on a table stand or on a travelling column.
* Soft start.
* Degree of protection: IP 54, Protection class: I

Extremely flexible shaft for special applications.

Length: 2.000 mm
Shaft core Ø: 10 mm
max. Speed: 9.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square large (8,5mm)

Extremely flexible shaft for special applications.

Length: 2.000 mm
Shaft core Ø: 12 mm
max. Speed: 9.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square large (8,5mm)

For light grinding, polishing and milling work.

Length: 1.500 mm
Shaft core Ø: 6 mm
max. Speed: 30.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square small (5mm)

For light grinding, polishing and milling work.

Length: 1.500 mm
Shaft core Ø: 6 mm
max. Speed: 30.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square small (5mm)

Shaft with rigid extension, for work in places that are difficult to access and are located in the component.

Length: 2.000 mm (500 mm rigid)
Shaft core Ø: 6 mm
max. Speed: 30.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square small (5mm)

Very flexible and robust due to steel protection hose.

Length: 1.800 mm
Shaft core Ø: 7 mm
max. Speed: 20.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square small (5mm)

Extremely flexible shaft for special applications.

Length: 1.500 mm
Shaft core Ø: 8 mm
max. Speed: 15.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square small (5mm)

Shaft with rigid extension, for work in places that are difficult to access and are located in the component.

Length: 2.000 mm (500 mm rigid)
Shaft core Ø: 8 mm
max. Speed: 15.000 rpm
Connection to Machine: M10 x 30 threaded Connection
Connection to handpiece: square small (5mm)

Flexible shafts for older Versions of the MB 20 with square connection

Length: 1.500 mm
Shaft core Ø: 6 mm
max. Speed: 25.000 rpm
Connection to Machine: square small (5mm)
Connection to handpiece: square small (5mm)

Working for the Industry as devel-oper and producer we must know what is needed. We have to have an ?ear? on the market. Intensive developing work, technical competent application engineers and the knowledge about the requirements from today and tomorrow provide the trend-setting development of systems with flexible shafts.Whereever in the world - today if there is spoken from systems of flexible shafts, then we talk about BIAX in the first place.

To be used with flexible shafts with claw large square (8,5 mm) connection

Order number
020000670
Revolutions per minute [min¯¹]
max. 9.000
Weight [g]
600
Max. tool shank Ø [mm]
6
Connection
Large square (8,5mm)

KGS 10-9
To be used with flexible shafts

Technical Data
Order number
020001600
Revolutions per minute [minˉ¹]
max. 9.000
Weight [g]
500
Max. tool shank Ø [mm]
10
Connection
Large square (8,5mm)

MKE 1-31
To be used with flexible shafts

Order number
020001400
Revolutions per minute [min¯¹]
max. 9.000
Weight [g]
650
Connection
claw 31

Tool holder for handpiece MKE 1-31

Order number
020003400
Revolutions per minute [min¯¹]
max. 9.000
Weight [g]
650
Connection
MK 1

ST 1
Tool holder for handpiece MKE 1-31


Order number
020003600
Revolutions per minute [min¯¹]
max. 9.000
Weight [g]
200
Connection
MK 1

To be used with flexible shafts with small square (5mm) connection

KGS 10-9
To be used with flexible shafts

Technical Data
Order number
020001600
Revolutions per minute [minˉ¹]
max. 9.000
Weight [g]
500
Max. tool shank Ø [mm]
10
Connection
Large square (8,5mm)