502,536 active members
5,712 visitors online
Register for free
Login Register
botek Präzisionsbohrtechnik - Banner

botek Präzisionsbohrtechnik

Products
Typ 158 in Vollhartmetall-Ausführung
Typ 158 in Vollhartmetall-Ausführung
Drill
botek Präzisionsbohrtechnik GmbH
Drills
New: Spiral Workover tools with internal cooling

Advantages at a glance:

-Best product quality, since development and manufacturing at botek

-Good life or good tensile strength by high toughness of carbide

-Smooth chip removal due to special surface finish in the flutes, eliminates the discharge machining

-4 chamfer for bore accuracy and a low bore Center history

-suitable for drilling oil, emulsion and minimum quantity lubrication

-Coating and Regrinding service at botek.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Typ 01 / 02 07
Typ 01 / 02 07
Gun drill
botek Präzisionsbohrtechnik GmbH
Gun drills
Typ 01 / 02 07
New: From DIA. 12,000 mm indexable insert with teeth

Type 01

Advantages:
-New and modern designed drilling tools, powerful and easy to use
-Very high efficiency for optimum cutting performance
-No Regrinding work required
-Version with extended guide rails to cross drilling suitable

Type 02

Advantages:
-New and modern designed drilling tools, powerful and easy to use
-Very high efficiency for optimum cutting performance
-No Regrinding work required
-Version with extended guide rails to cross drilling suitable

Type 07

Advantages:
-Newly developed high-performance tool for rough machining
-Very few wear parts for the entire drill range
-Easy handling due to fixed pockets
-For use on machines with internal Coolant supply
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Typ 110
Typ 110
Gun drill
botek Präzisionsbohrtechnik GmbH
Gun drills
Typ 110
When the single-lip drill bit with cutterhead soldered on corresponding guide rails are intended to support the drilling head.

The cutting force presses the Rails when drilling so heavily against the wall of the hole, creating a smoothing effect and thus the characteristic for the drilling process of lips of a surface quality.

Different size forms are at the single-lip drill bit - depending on type - available for optimal adaptation to your boring job.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Typ 113
Typ 113
Gun drill
botek Präzisionsbohrtechnik GmbH
Gun drills
Typ 113
Tool design:

Drill head and shank are made of a tungsten carbide blank. This tool is very process-safe and efficient. Longer service life are largely due to lower torsion vibrations.

This type of tool, the clamping sleeve (steel) with a set of pins is performed. Clamping sleeve and shank are connected through a solder joint.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Typ 113-HP
Typ 113-HP
Gun drill
botek Präzisionsbohrtechnik GmbH
Gun drills
Typ 113-HP
Newly developed high-performance execution as an alternative to the drill

Advantages at a glance:

-maximum cutting performance

-up to 800% higher feed rates

-particularly suitable for difficult to machine steel materials

-cheap and fast Regrinding

Well suited for use with drilling oil, minimal quantity lubrication and high quality emulsion.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Typ 113-HP-M - VHM-Einlippenbohrer
Typ 113-HP-M - VHM-Einlippenbohrer
Gun drill
botek Präzisionsbohrtechnik GmbH
Gun drills
Newly developed high-performance execution for use with MMS (MQL)
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Typ 12 - Vollbohrwerkzeug
Typ 12 - Vollbohrwerkzeug
Gun drill
botek Präzisionsbohrtechnik GmbH
Gun drills
Typ 12 - Vollbohrwerkzeug
Advantages at a glance:

-Very powerful tools by a high stability of the main body

-A few wearing parts due to reduced number of indexable inserts and standardised Rails

-Easy setting of intermediate mass by replacing the adjusting plate

-Guide rails and external cutting dual use Centre cutting six suitable

-Standard chip lead levels for a wide range of applications
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Typ 120 - Zweilippenbohrer mit Bohrkopf aus Metall
Typ 120 - Zweilippenbohrer mit Bohrkopf aus Metall
Gun drill
botek Präzisionsbohrtechnik GmbH
Gun drills
botek two lip drill consist with drill head soldered on from a tungsten carbide cutter head, the shank from hardened and tempered steel, as well as the clamping bushing made of steel. Drill head and clamping sleeve are connected by solder to the shank.

Two lip drill can be supplied with different coatings. The type of coating is dependent on the material, coolant and drilling situation and each is tailored to the two lip drills.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Schleifeinrichtungen
Schleifeinrichtungen
Other grinding tool and accessory
botek Präzisionsbohrtechnik GmbH
Other grinding tools and accessories
Schleifeinrichtungen
The botek jigs of the ZS series are suitable especially for grinding of single tools or small series.

They are suitable for mounting on the botek grinding machine MS-01 or other standard tool grinding machines.

The desired sanding angle can be set and read from scales on the jig.

The tools are introduced to regrind into the clamping Bush and fixed through a Prism, and stretched.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Schleifmaschine MS 12-2
Schleifmaschine MS 12-2
Other grinding tool and accessory
botek Präzisionsbohrtechnik GmbH
Other grinding tools and accessories
Schleifmaschine MS 12-2
Larger series, with the same cutting geometry, especially economically to the botek multi-station machine MS-12 be sanded.

The machine is designed for tool diameter 1,850-12,000 mm and suitable for tool lengths up to 1000 mm.

After one-time setting of the device you can - easily and quickly - even and economic Nachschliffe be achieved.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
BOZA
BOZA
Other component for dies and moulds
botek Präzisionsbohrtechnik GmbH
Other components for dies and moulds
BOZA
Drilling oil feed apparatus

For rotating and non-rotating workpieces clamping cones or forehead sealing
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Schwingungsdämpfer
Schwingungsdämpfer
Other component for dies and moulds
botek Präzisionsbohrtechnik GmbH
Other components for dies and moulds
Schwingungsdämpfer
Related anti-vibration tools

The vibration dampers are incorporated into a shell insert stock.
The clamping is carried out with the upper part of the betting pool. The vibration dampers for related tools consist of two-part damping jacks. These can be delivered in a steel / plastic combination.

Tools rotating vibration dampers

The vibration dampers are incorporated into a shell insert stock.
The damping pressure can be adjusted during the drilling process, using a wrench on the Collet.
A cone of attenuation is required for each drill pipe size.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request