Friedrich Britsch GmbH & Co.KG
Products
everything. always. quick.
206
Friedrich Britsch GmbH & Co. KG
Collet chucks
ER-Double Holders with same collets
ER-Double Holders for ER-Collets ER08,ER11,ER16,ER20,ER25 All double holders will be supplied with clamping nuts. Runout accuracy ER-double collet holders < 5µ Available in several shank diameters with clamping flat throughout (WD) or with clamping flat stepped (FL)
ER-Collet Holder
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Collet chucks
ER-Collet Holder for ER-Collets ER08,ER11,ER16,ER20,ER25,ER32,ER40 All holders will be supplied with a clamping nut. Runout accuracy ER-collet holder < 5µ Available in several shank diameters with radial inner coolant lead in (IK), with clamping flat throughout (WD) or with clamping flat stepped (FL).
ER-Collet Holder with lateral coolant connection
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Collet chucks
ER-Collet Holder for ER-Collets ER16,ER20,ER25
All holders will be supplied with a sealed clamping nut.
Runout accuracy ER-collet holder < 5µ
Available lateral coolant connections: M12x1,5 (AK0), G1/8" (AK1), M8x1 (AK2), M10x1 (AK3)
ER-collet metallic sealed
|
Collet
Friedrich Britsch GmbH & Co. KG
Collet chucks
ER-collet metallic sealed.
Available for following ER-collets: ER16MD, ER20MD, ER25MD, ER32MD
Also available in high precision (UP)
ER-collet sealed
|
Collet
Friedrich Britsch GmbH & Co. KG
Collet chucks
ER-collet DIN6499 A sealed with special rubber.
For coolant pressure up to 80 bar.
Available for following ER-collets: ER11S, ER16S, ER20S, ER25S, ER32S, ER40S
ER-Floating reamer collet
|
Collet
Friedrich Britsch GmbH & Co. KG
Collet chucks
Advantages:
- Collets for floating reamers and for rigid drilling with floated balance
- Floating collets replacing a floating holder
- Particularly used in driven tools
ER-Tapping collets with length adjustment
|
Collet
Friedrich Britsch GmbH & Co. KG
Collet chucks
Advantages:
- Spline drive, espacially for stable tapping
- Length compensation by tension
- Precise torque
- Exact guiding
Modular Quick Change System
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Collet chucks
Modular quick tool change system in various shank designs and insert types.
Changing the head is possible without removing the basic holder from the tool carrier.
Very precise fit of the head. Precisely fitting, rigid fastening.
Available for left and right inserts.
Changing the head is possible without removing the basic holder from the tool carrier.
Very precise fit of the head. Precisely fitting, rigid fastening.
Available for left and right inserts.
Modular system of tool-holders with cylindrical shaft
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Collet chucks
Quick change with cylindrical shaft for ER-Collets. Available for ER16 collets.
- Ultra precise fitting of the interchangeable head. Rigid fixation.
- With inner coolant. Hydraulic connector G1/8“
- Quick change, without having to remove the tool-holder from the drill unit
- Presetting is possible outside of the machine
- Available tool-holder diameters : 22 mm, 25 mm and 3/4”
Tool clamping
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Collet chucks
ER collets series 400 according to DIN 6499 B gänigen available in all sizes: ER08, ER11, ea16, ER20, ER25, ER32, ER40, ER50, ER60
also in UP (averaged concentricity 2µ) available
This description was translated from German to English by "Bing Translator".
