Search:

It's probably noth worth posting this (old), but I see 11ms intervals. I saw in the specification that we need at least 50ms pause between the packets.
I'm missing the CRC16 checksum too in your...

Hi Dan, I wouldn't call that a little contribution, though!
Kind regards, Jack.

Hi Dan,
I agree with Paul, you are awesome!
The plugin works like a charm.
A very happy HY12 user here.
Regards, Jack.

Hi Dan,
thanks for your great work!
In your previous post this was also version HY12, is it the same or has something updated?
Jack.

Hi Dan,

super, that's quick! And it works!
I tested shortly with low RPM, because it's midnight here, I can't make too much noise next room from the bedroom.
Now I know it will never fail for...

Hi Dan,

you are welcome!
It appears like UCCNC 1.2039 isn't officially released, I installed it without overwriting macros, and all still works.
Only my Amps field is gone and Sact isn't...

Hi Dan,

today, the spindle kept spinning on the end of the job, the button M3 button indicated off, as it should. Toggling it on and off switched the spindle off.
I guess, chance this can happen...

Hi Dan, I got the empty box from here:
A0620109 | ComTec Sloped Front Enclosure, Black, ABS, 150 x 200 x 62.8mm | OKW
http://www.cnczone.com/forums/attachment.php?attachmentid=361888&stc=1

Then...

I certainly could learn from you!
Great job!
Today I almost finished my control panel, everything still works.


http://www.cnczone.com/forums/attachment.php?attachmentid=361830&stc=1

Fans in...

Hi Dan,
I have just tested HY10 and could not find any issues with it.
Thank you very much!!!
Kind regards,
Jack.

Hi Dan,

excellent, thank you!

Jack.

Hi Dan,

may I ask, how did you develop the plugin? Which language did you use (C#, C++)? Which IDE do you use for it?
I'd like to learn it too. I do know both C# (to a degree) and C++.

Kind...

Hi Dan,

I actually placed the those buttons closer to each other, so from top to bottom, I decreased t Y positions, I thought by 15 the first 30 the second and so on...

jack.

Hi Ger,

funny, I had requested it too, so there are more requests.
Anyway, Dans plugin takes care for it now.

And I have added the Amps field on some spot I could free a bit of space:
...

Hi Dan,

Wow, awesome! That works like a charm!
To test it, I entered S12000 in the MDI, the Sact field shows the Sset value * override value, the way I liked it, and when I turn the pot to 200%,...

Hi Dan,
to be honest, that is because I am totally clueless, how to configure it.
In the plugin, for the Sact Labelnumber, I should fill in something in the range of 20000-20999.
As I have no clue...

Hi Dan,

thank you very much for your time to develop this great plugin. It's really awesome!!!
BTW, on Windows 10, the driver for the USB to RS485 adapter got installed automatically and works...

Hi Peter,
Note RPM min is 4000 for me and max is 24000 of course.
I used Plugin Test7.
START:
After starting UCCNC, readings on screen are: Sset: 4000.0, Sact: 0.0
Sact is always 0, because I do...

Hi Peter,
can you post these setting of your VFD, please?
I'd like to check them for you.

Assuming a 400Hz/24000RPM spindle motor (otherwise it might be 300Hz/18000RPM).
PD001 - Probably...

Hi Dan,
thank you very much for your hard work on the plugin! Awesome!
Do you want me to test this version Test7 on UCCNC 37 and Windows10 (Intel I3)? I can collect some systems specs.
It is night...

Hi Kaspars,
you are welcome! I have learned a lot from the people here, and I am glad I could help you. :-)

Yes, 120Hz was a bit on the high side for a 300Hz spindle. 90 would be better in your...

Hi Dan,
I also use the UC300ETH-5LPT, and the ch340T chip for RS485.
My computer for UCCNC is a Shuttle DS67U3 Barebone (Intel Core i3-6100, 2 cores 3700 MHz), so plenty of speed. It runs Windows...

Hi Kaspars,
to do what Dan asks, you place the cursor in the MDI field, type s18000 and hit enter.
I'm sure you know, but your screenshot didn't reflect that, just to be sure.
Jack.

Hi Kaspars,
I hoped to find some wrong setting, but to me your settings do look right! No worries to smoke your spindle motor.
I'm a bit puzzled why your speed reading is too low by a exactly a...

Hi Dan,
like Gerry, I noticed (and kind of like it) that the communication confirmation window didn't pop up at start, using hytest2.
All works without any problems.

Do you think it is a good...

Hi Kaspars,

what 3kW spindle motor do you have? (voltage, current rating)
Can you post these parameters of the VFD?

PD003:
PD004:
PD005: PD008:
PD006: ...

Hi Dan,

the plugin works flawless! Excellent work!
I haven't seen any issues now!

Kind regards,
Jack.

Hi Dan,
My HY settings are:
Port: COM4, Baudrate: 9600
Min RPM: 4000, Max RPM: 24000, Max Frequncy: 400
Sact Labelnumber: 20200 (I don't use it)
Checkbox for Amps: Not checked, Amps Labelnumber:...

Hi Dan,
Only once, I noticed the spindle didn't switch off, after it run for 10 seconds or so. (just testing)
On the screen I saw the button indicated "off" state, while the spindle was still...

Hi Dan,
thank you very much for your quick good fix!!!

I have tested it using Windows 10 (and UCCNC 1.2037), and it now works just fine!
Note, I needed to do the configuration again (even though...