564,962 active members*
3,893 visitors online*
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMF 200|8 (Reference-Nr. 030294)

Asking price

  • Reference number 030294
    Manufacture Year 2021
    Operation Hours not applicable
  • Metal working machines
  • Milling machines
  • Bed milling machines (moving column)
  • Heidenhain

  • General
    Traveling column machine; Control: CELOS with Heidenhain TNC 640
    Technical Data
    Feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
    Rapid traverse longitudinal/transverse/vertical 50/50/50 m/min
    Working area 1
    Longitudinal 2000 mm
    Cross 800 mm
    Vertical 850 mm
    Tool changer
    Type of magazine Chain
    Number of tools 90
    Max. tool weight 6 Kg
    Max. tool length 300 mm
    Max. tool diameter with occupied adjacent pockets 80 mm
    Max. tool dia. with free neighbouring pockets 130 mm

  • Swivelhead, B-axis Controlled NC swivel milling head 20,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12
    Drive power (100% DC) 25 kW
    Drive power (40% DC) 35 kW
    Torque (100% DC) 86 Nm
    Rigid table with integrated rotary axis (centre) Rigid table with integrated round table d 800 mm // 31.49 in located in the middle of table table load max. 800 kg // 1763 lbs
    Clamping System HSK-A 63
    Spindle taper HSK-A 63
    Speed range 20 - 20000 rpm
    Torque (40% DC) 130 Nm
    Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Spindle speed 20.000 rpm Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
    Tool magazine 90 places Tool magazine 90 places SK40/HSK-A63 Chain type with double gripper (option from standard)
    3D quickSET elevated constructuion 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
    Infrared measuring probe TS460 Infrared touch probe make Heidenhain TS 460
    Tool laser measuring Blum Laser tool measuring Blum LC50 DIGILOG Measurement of length and diameter Automatic cleaning with external air blast Calibration Tool with tool holder (not with TT 140/160 possible, for pendulum machining, please order 2 pieces)
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air, low oil rate possible
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Internal Coolant Supply 80bar/980l frequency controlled Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
    RTF Bezeichnung Gültig ab fester Serienbezug Letzte Änderung Geändert von Aktion Door drive for working area doors Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
    Oil mist separator Oil and emulsion mist separator mechanical filter system 1600 m³/h
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    NETservice NETservice Qualified support by Internet-based remote diagnostics
    IoTconnector IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)
    Messenger V4 Messenger V4 Clear presentation of the machine live status.
    Service Agent Service Agent Overview of all maintenance work on the machine

Send request

More products from DMG MORI Global Marketing GmbH