554,748 active members*
2,420 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMF 260|11 (Reference-Nr. 030299)

Asking price


  • Reference number 030299
    Manufacture Year 2016
    Operation Hours not applicable
  • Metal working machine
  • Milling machines
  • Bed milling machines (moving column)
  • DMG MORI
  • Heidenhain

  • General
    in travelling column construction NEW DMG MORI Design swivel head (B-axis) Pivoting range continuous operation: +/- 90° Swivel range for short-term positioning mode: +/- 100°; Control: 3D Control Heidenhain iTNC 530 HSCI
    Working area 1
    Longitudinal 2600 mm
    Vertical 900 mm
    Cross 1100 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
    Rapid traverse longitudinal/transverse/vertical 80/60/60 m/min
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 30
    Max. tool weight 6 Kg
    Max. tool length 300 mm
    Max. tool diameter with occupied adjacent pockets 80 mm
    Max. tool dia. with free neighbouring pockets 130 mm

  • Fixed table Fixed Table
    Table surface 3200 x 1100 mm
    Maximum load (table centre) 4000 Kg
    Slot width 18 mm
    Number of Slots 11
    Distance between T-Slots 100 mm
    Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Dynamic package for DMF 260 linear (Y1100) Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag
    Spindle speed 20 - 18,000 rpm HSK-A63 Spindle speed 20 - 18,000 U/min HSK-A63 for tool taper according to DIN69893 with power 35/25 kW // 46.93/33.52 hp (40/100%DC) (differently from standard)
    Infrared measuring probe TS 649 Infrared touch probe make Heidenhain TS 649
    Oil mist separator Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
    Air blast through spindle centre Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
    Inner coolant supply 40Bar/600l Internal coolant supply (ICS) with paper type filter 40 Bar/600 l // 580 psi/158.5 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Application Tuning Cycle ATC-Software Application Tuning Cycle ATC-Software Selection of the optimal milling mode for the next machining-step
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Special equipment Double switching filter 30 µm

Send request

More products from DMG MORI Global Marketing GmbH