DMF 260|11 (Reference-Nr. 030306)

•  
  Reference number 030306

  Manufacture Year 2021

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Milling machines
• Type of Machine
  Bed milling machines (moving column)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  in travelling column construction NEW DMG MORI Design swivel head (B-axis); Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	2600 mm
  Cross	1100 mm
  Vertical	900 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	80000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	80/60/60 m/min
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool weight	15 Kg
  Max. tool length	500 mm
  Max. tool diameter with occupied adjacent pockets	115 mm
  Max. tool dia. with free neighbouring pockets	160 mm

• Specification
  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Dynamic package for DMF 260 linear (Y1100)	Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag
  Rigid table with integrated rotary axis (leftside)	Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
  	Table surface 3200 x 1100 (Ø 1050) mm
  Tool magazine 60 positions	Tool magazine with 60 positions, chain type with double gripper
  	Rotation speed max.4. Axis 50 rpm
  	Distance between T-Slots 100 mm
  	Number of Slots 11
  	Slot width 18 mm
  Mechanical setup station	Mechanical setup station SK50/HSK-A100
  Load support for tool magazine	Load support for tool magazine SK50/HSK-A100 with 2 pockets at the stairs to magazine
  Spindle speed 20 - 10,000 rpm HSK-A100 430 Nm	Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 52/42 kW // 69.7/56.3 hp with torque 430/300 Nm (40/100% ED) (differently from standard)
  Swivel radius 275 mm for B-axis	Swivel radius 275 mm for B-axis SK50/HSK-A100 Distance spindlenose to table vertical: 20 mm bis 920 mm horizontal: 295 mm bis 1195 mm
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Tool laser measuring Blum	Laser tool measuring Blum (not with TT 140 possible, for pendulum machining please order 2 pieces)
  Oil mist separator	Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
  Signal lamp 4-colour	Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
  Internal Coolant Supply 80bar/980l frequency controled	Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  Chip flushing for working area	Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included
  Double cartridge filter,25 µm	Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
  Coolant tempering for internal coolant 980l	Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l)
  Door drive for working area doors	Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
  proTIME	proTIME Visualisation of remaining runtime, remaining workpieces and the machine state
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Turning/Milling cycle	Turning / milling cycle For the machining of internal and external diameter using spindle orientation
  Laminated safety glass	Laminated safety glass for Windows in the two front doors
  DXF Reader	DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours
  Exhibition design DMF	Exhibition design DMF chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan
  Stop block HSK-100/SK50/CAT50	Stop block HSK-A100/SK50/CAT50
  IoTconnector	IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)
  Machine Data Connector	Machine Data Connector (MDC) Uniform machine data interface.
  NETservice	NETservice Qualified support by Internet-based remote diagnostics
  SERVICEcamera	SERVICEcamera Camera set incl. accessories (Antenna, charger, incl. SD card)
  Messenger V4	Messenger V4 Clear presentation of the machine live status.
  Service Agent	Service Agent Overview of all maintenance work on the machine

I like it 0