Technologie cycle alternating speed | Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control) |
Counter spindle centre | Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery |
Program state control | With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines. |
Run-time monitor | Graphic display of the program runtime (main and idle times) of up to 3 channels on the control system |
Multi-thread cycle 2.0 | Multi-thread cycle 2.0 Cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. Targeted overlapping of threads with cross-holes, e.g. redirection systems with ball |
Broaching | Technology cycle with dialog-guided programming for the production of any keyways according to DIN6885 or driving grooves according to DIN138 with standard tools. This option contains the technology cycle with the corresponding input mask. |
Y-Axis Parting | Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and |
Easy Tool Monitor 2.0 | Tool breakage monitoring Easy Tool Monitor 2.0 Simplified holistic view of the actual state of the tools in Side screen of CELOS Setting of one monitoring limit for each tool selected from the tool list. Easy teaching function to measure monitoring limit |
DXF-Reader for Siemens | DXF-Reader for Siemens direct on the control for the import of DXF-files as contour or position sample. - support of layer and colours - selection of geometry elements |
Energy meter for Siemens 840 sl OP CELOS | Energy meter for 3D control Siemens 840D solutionline Operate with CELOS |
Chuck rinsing device, outside | chuck rinsing device, outside (main spindle) |
Chuck rinsing device, outside, counter spindle | Chuck rinsing device for counter spindle, outside |
Clamping pressure adjustment, motor-adj. valves MS | Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program |
Clamping pressure adjustment, motor-adj. valves CS | Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program |
Hydr. hollow clamping attachment dia. 77 mm | Hydraulic hollow clamping attachment dia. 77 mm (3.03 inch) Pullforce 72 kN (16.186 lbf) at pmax 45 bar (653 psi) Tie rod not standard GILDEMEISTER Not suitable with clamping device with bar passage smaller than dia. 75 mm (2.95 inch) |
Tailstock function for counter spindle | Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC |
Counter spindle turnMASTER 8 Inch, Y-axis | Option package complete machining consisting of: turnMASTER 8 Inch counter spindle as integrated spindle motor, ISM 65 synchron - Drive rating (S1 100% / S3 40% d.c.) 25 / 32 kW - Speed range 0 - 5000 rpm - Partly clamping attachment Ø66 mm coolant |
Double cartridge filter on chip conveyor | Double cartrige filter on chip conveyor |
Extension of the discharge chute about 300 mm | Extension of the discharge chute at the chip conveyor about 300 mm |
BFU 8/20 bar, freq. con., 600 l | Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/80 litre/min and 20 bar/40 litre/min (116.psi/20.8 gal/min and 290 psi/10.5 gal/min) with frequency-controlled pumps programmable via M-functions coolant s |
Hinged type chip conveyor | Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min |
Tool measuring dev. in working area, manually,Ø315 | Tool measuring device in the working area with touch probe TT30 from Marposs, manually swiveling, up to chuck diameter Ø 315 mm (12.4 in) |
Portal loading system GX 15 T | Portal loading system GX 15 T consisting of: - Horizontal axis - Vertical axis in telescopic version - Swivel axis - Compact double gripper - Workpiece storage as stacking magazine - Integration in the machine control Technical data: - Portal height a |
Automatic loading hatch with 6 axis robot | Automatic loading hatch for automation with 6 axis robot (Remark: only at Siemens control, option B-H7050, automatic door is not possible) |
Fixing elements | Four fixing elements for dowelling the machine |
proTIME | proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state |
Window rinsing of the security window | Window cleaning of the security window of the working area door by compressed air (Remark: The employment of coolant can limited the view on the workpiece at machining) |
BDE, Extended interface (8 from > 40 signals) | Signal provision for shop floor data collection. Extended interface. There are 8 of > 40 signals potential-free contacts provided. If an order is placed, the corresponding form must be requested from the factory. |
Enlarged container for slideway oil, 6l | Enlarged container for slideway oil with a container size of 6 l (1.58 gal) |
Package for increased ambient temperature | Package for increased ambient temperature consisting of cooling system for control cabinet (until 40º) |
DMG MORI NETSERVICE | DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics |
IoT connector | DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS) |
SERVICE AGENT (CELOS) | SERVICE AGENT (CELOS) Overview of all maintenance work on the machine |
MESSENGER (CELOS) | MESENGER (CELOS) Clear live status of the networked machines |