NLX 2500|700 (Reference-Nr. 071532)

•  
  Reference number 071532

  Manufacture Year 2016

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Lathes
• Type of Machine
  CNC lathes (4 or more axes)
• Manufacturer
  DMG MORI
• Control
  Mitsubishi
• Description
  
  

  Characteristics
  Max machining diameter	460 mm
  Dimensions (L x W x H)	2,56 x 1,66 x 1,75 m
  Drive power main spindle	18,5/15 kW
  Rapid feed X / Z	30/30 m/min
  Movements X / Z	260/795 mm
  Number of tool stations	12
  Speed max.	4000 rpm
  Bar diameter max.	80 mm
  Spindle bore	91 mm
  Max. Turning Length	728 mm
  Weight approx.	4500 Kg
  General
  CNC Turning Centre; Control: Control M730UM

• Specification
  
  

  Tailstock spindle live center MT5 (STD)	Tailstock Spindle Live Center MT5 (Standard Specification) The highly-rigid servomotor-driven digital tailstock specification Taper hole of tailstock spindle: MT5 (live center) Tailstock thrust force: 0.67 to 5.88 kN (0.15 to 1.32 klbf)
  CELOS - ERGOline Touch	CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p
  12-station bolt-tightened turret for CL, SL, Dura holders	12-station bolt-tightened turret for CL, SL, Dura holders (turning specification) Standard 10-station turret can be changed to 12-station turret for NLX2500 (two-axis turning specifications).
  High-pressure coolant system (635/ 1,040 W)	High-pressure coolant system (635/ 1,040 W) With this specification, abilities to remove the chips and to cool the tool or workpiece during cutting are higher compared. A pump which supply coolant to the turret is changed to the high-pressure specificati
  Chip conveyor (right discharge, hinge type) (/500)(/700)	Chips are loaded onto hinge type plate and discharged to outside of the machine. Effective in discharging long chips. Not suitable to discharge minute powdery chips generated when machining cast or gun metal etc because chips may flow into coolant tank
  Bar feeder I/F (LNS) (multiple)	Bar feeder I/F (LNS) (multiple) This is the interface for the bar feeder, which increases productivity by feeding bar material automatically.
  Manual in-machine tool presetter (pivoting type) (STD)	Manual In-machine Tool Presetter (Pivoting Type) (Standard) It simplifies the complicated setup work at the tool change. The position of the tool nose is measured precisely by just bringing the tool nose into contact with the sensor, and the measured valu
  Chuck foot switch (double) for spindle 1	Chuck foot switch (double) for spindle 1 You can open/close the chuck with two foot switches.
  Transformer 35 kVA	Transformer 35 kVA three phase autotransformer in cabinet CLPB 21F-0727T0300

I like it 0