495,938 active members
8,968 visitors online
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

NLX2500/700 (Reference-Nr. 071250)

Asking price


  • Reference number 071250
    Manufacture Year 2017
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • CNC lathes (4 or more axes)
  • DMG MORI
  • Mitsubishi

  • General
    CNC Turning Centre; Control: Control M730UM with CELOS
    Characteristics
    Max machining diameter 356 mm
    Max. Turning Length 705 mm
    Spindle bore 91 mm
    Bar diameter max. 80 mm
    Speed max. 4000 rpm
    Number of tool stations 12
    Rotary tool spindle speed 10000 rpm
    Movements X / Z 260/795 mm
    Rapid feed X / Z 30/30 m/min
    Drive power main spindle 18,5/15 kW
    Dimensions (L x W x H) 3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) m
    Weight approx. 5820 Kg

  • CELOS - ERGOline Touch CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p
    (Spindle 1) Standard spindle 18.5/18.5/15 kW, 4,000min-1 (Spindle 1) Standard Spindle 18.5/18.5/15 kW, 4,000 min-1 Max. spindle speed: 4,000 min-1 Chuck size: 10 inch., 12 inch. (8 inch. also for the 2-axis turning specification) Spindle nose type: JIS A2-8 Through-spindle hole diameter: ? 91 mm (dia.3.58 inch.
    (Spindle 1) KITAGAWA 10in. Hollow Chuck BB210A821 (Spindle 1) KITAGAWA 10-inch Hollow Chuck BB210A821 Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck outer diameter: Ø 254 mm (dia.10 inch.) Through-hole diameter: Ø 81 mm (dia.3.19 inch.) Gripping diameter: Max. Ø 254 mm (dia.10
    (Spindle 1) Hollow Cylinder set for KITAGAWA 10in. Hollow Chuck BB210A821 (without chuck body) (Spindle 1) Hollow Cylinder Set for KITAGAWA 10-inch Hollow Chuck BB210A821 Hollow cylinder Kitagawa SR1781 and hollow draw pipe R75245 are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagram for the combination
    Chuck foot switch (double) for spindle 1 Chuck foot switch (double) for spindle 1 You can open/close the chuck with two foot switches.
    Rotary tool spindle 40/ 14 Nm, 10,000 min-1 High-Torque Rotary Tool Spindle 40/14 Nm (29.5/10.33 ft·lbf), 10,000 min-1 High-torque rotary tool spindle for the 10/12-station in-house bolt-tightened turret specification. BMT (Built-In Motor Turret) is installed with the milling specification, and
    12-station bolt-tightened turret for NL holders (MC) 12-station bolt-tightened turret for NL holders (MC) Standard 10-station turret can be changed to 12-station turret for NLX2500MC.
    Tailstock spindle live center MT5 (STD) Tailstock Spindle Live Center MT5 (Standard Specification) The highly-rigid servomotor-driven digital tailstock specification Taper hole of tailstock spindle: MT5 (live center) Tailstock thrust force: 0.67 to 5.88 kN (0.15 to 1.32 klbf)
    Chip conveyor (right discharge, hinge type) (/500)(/700) Chips are loaded onto hinge type plate and discharged to outside of the machine. Effective in discharging long chips. Not suitable to discharge minute powdery chips generated when machining cast or gun metal etc because chips may flow into coolant tank
    High-pressure coolant system (635/ 1,040 W) High-pressure coolant system (635/ 1,040 W) With this specification, abilities to remove the chips and to cool the tool or workpiece during cutting are higher compared. A pump which supply coolant to the turret is changed to the high-pressure specificati
    Chuck top coolant (Main spindle) Chuck Top Coolant Unit (Spindle 1) The coolant is discharged through the coolant nozzle on the upper part of the chuck to flush away chips and reduce heat generated on the workpiece during cutting. It uses a different coolant pump from the tool tip coola
    Chip flushing coolant for bed cover Chip flushing coolant for bed cover This device washes the chips accumulated on the top surface of chuck cover with coolant for them to be collected by chip conveyor. The M code used for this device is different from that of the turret coolant. In rear
    Air blow for chuck (spindle 1) Air Blow for Chuck (Spindle 1) Air is blown to the chuck for removing chips adhering to it. Removing the chips prevents the gripping accuracy from being impaired by the chip pinching. The air blow nozzle is installed on the upper part of chuck. The co
    Manual in-machine tool presetter (pivoting type) (STD) Manual In-machine Tool Presetter (Pivoting Type) (Standard) It simplifies the complicated setup work at the tool change. The position of the tool nose is measured precisely by just bringing the tool nose into contact with the sensor, and the measured valu
    Automatic door (/500)(/700) Automatic Door (/500) (/700) The front door is opened and closed by the air cylinder. Even when the operator is caught by the front door, the tape switch installed in the door is immediately activated to stop the door. Automatic door opening width: F
    EtherNetI/P I/F EtherNetI/P I/F This I/F is used for transferring control signals between the machine and peripheral equipment via Ethernet. This I/F can be connected to all peripheral equipment that has terminals corresponding to LAN cables. This specification also
    Interface for Robot (EtherNet/IP), Need to select EtherNet/IP Interface Robot I/F (EtherNet/IP), Separate EtherNet/IP I/F Required The interface signals for mounting robots are made available. The signals are exchanged with the robots using the EtherNet/IP communication protocol. The use of the robots allows the automatic loa
    Interface for Safety fence (electric Interface) Safety Fence I/F (Electric I/F) Signal for indicating the status of the safety fence door to the machine. When the machine receives the signal indicating that the safety fence door is closed, power is supplied even if the machine front door is open. W
    Dry anchor Dry anchor Anchors fitted on the bed to prevent the machine from moving because of vibrations when starting up or because of slight earthquakes. They control vibration in all directions as far as possible.
    Setting Unit mm Setting Unit, MM The unit to be used for the screen display and program commands is set to millimeter (mm). Turning: MM specification for the turret Horizontal machining center: MM specification for the tapped pallet
    (Only for Europe) Islands, open pockets Islands, open pockets Islands ·Programming process can be greatly simplified because minimum input operation is required even for the complex machining. Open pockets Definition of open pockets eliminates tool paths with no machining allowance, makin
    Transformer 45 kVA Transformer 45 kVA three phase autotransformer in cabinet CLPB 26F-0727T04001

Send request

More machines from DMG MORI Global Marketing GmbH