547,086 active members*
2,791 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMC 65 H duoBLOCK (Reference-Nr. 064043)

Asking price


  • Reference number 064043
    Manufacture Year 2012
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining Centers (Horizontal)
  • DMG MORI
  • Siemens

  • General
    Horizontal Machining Centre; Control: 3D Control Siemens 840D solutionline
    Technical Data
    Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
    Working area 1
    Longitudinal 700 mm
    Cross 700 mm
    Vertical 700 mm
    Miscellaneous
    Clamping System HSK-A 63

  • Cabine Full protection cabin
    Main drive Drive power (100% DC) 20 kW
    Drive power (40% DC) 20 kW
    Speed range - 12000 rpm
    Spindle taper HSK-A 63
    NC rotary table with pallet changer Type of Measuring system Direct measuring system
    Table surface 500 x 500 mm
    Centre bore 50 mm
    Maximum load (table centre) 600 Kg
    Slot width 14 mm
    4. Axes (swivelling range) 360 x 0,001 degree
    Rotation speed max.4. Axis 40 rpm
    Distance between T-Slots 100 mm
    Number of Slots 5
    Spindle taper HSK-A 63 Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)
    Tool magazine, chain vert., 80 pockets Tool magazine Vertical chain magazine with 80 tool pockets
    Production package 40 bar/23 l/min, 980 l tank Production package Coolant unit 980 l / 259 gallon, paper band filter Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) roof chip rinsing 300 l/min / 80 gallon/min (theoretical pump performance) through jets with n
    Direct measuring system X,Y,Z Direct measuring system X-, Y-, Z-axis, Positional uncertainty: P=0.006 mm / 0.00024 in (VDI/DGQ 3441)
    Tool identification (TDS) Tool identification (Tool Dialogue System TDS) Reading/Writing manually, without with a chip of Balluff BIS C for spindle
    Spray pistol with pump Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance)
    Oil and emulsion mist separator Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h
    Operation panel for loading station tool magazine Control panel Siemens for loading station Tool magazine with TFT screen 8 Softkeys, alpha-numeric keyboard No parallel operation with CNC control.
    Special equipment Production package such as module P-K0346, but with 80bar and vario valve Torque support bolt solution with 3-point system Automatic set-up station door 4/7 clamping hydraulics for work table and Set-up station for the connection of hydraulic Clamping
    Special equipment 3 air lines at the setup station must be independent from each other with valve (via switch on the control bar) can be switched with the setup station door open can. One switch per line (open / close)

Send request

More products from DMG MORI Global Marketing GmbH