DMU 65 H monoBLOCK (Reference-Nr. 064028)

•  
  Reference number 064028

  Manufacture Year 2020

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining Centers (Horizontal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  Working area 1
  Longitudinal	650 mm
  Cross	700 mm
  Vertical	950 mm
  General
  Horizontal universal machining center; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min

• Specification
  
  

  Tool magazine	Application Horizontal
  	Type of magazine Chain
  	Type of gripper Double gripper
  	Number of tools 40
  	Slot width 14 mm
  	Maximum load (table centre) 600 Kg
  	Centre bore 50 H6 mm
  	Table surface Ø 650 mm
  NC swivel rotary table	Type of Measuring system Direct measuring system
  Cabine	Full protection cabin
  	Rotation Speed 5. Axis 20 rpm
  	5. Axes (swivelling range) +120/-120 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 40 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 9
  Motor spindle 20,000 rpm	Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Kinematics axis A / C for swivel rotary table	Axis kinematics A/C for swivel rotary table Axis designation swivel axis: A Axis designation rotary axis: C 0° position A axis: table vertical Rotary axis setting: modulo Machine datum: In table center on the table top Not compatible with monoBLOCK kinem
  Rotating clear-view window	Rotating clear-view window cabin door
  Production package 40 bar/23 l/min, 600 l tank	Internal coolant supply: coolant unit 600 l / 160 gallon, paper band filter Internal coolant supply, 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) External coolant supply 4 bar / 58 psi - 40 l/min / 10.4 gpm (theoretical pump perform
  Split-able chip conveyor	Separable chip conveyor Less space required behind the machine for pulling out the chip conveyor in case of maintenance
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Interface for Oil and emulsion mist separator	Interface mechanical and elektrical for oil- and emulsion mist separator
  Infrared measuring probe Renishaw HSK-A 63	Infrared measuring probe Type Renishaw OMP 60 HSK-A 63
  Tool measuring in machining area Blum Laser	Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Sensorpaket i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  MDynamics package	Deckel Maho package MDynamics Improved surface quality combined with reduced machining time
  Interpolation turning	Interpolation turning Turning-recessing cycle Manufacture of simple sealing surfaces and grooves using Machining Centres. For Siemens control only in horizontal and vertical plane
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  3D data model	3D data model in STEP format for integration in a CAD system by the customer. It is used for machine simulation. (Data basis in component structure)
  DMG MORI NETSERVICE	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoT connector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines

I like it 0