502,874 active members
5,697 visitors online
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMC 1450 V (Reference-Nr. 050984)

Asking price

  • Reference number 050984
    Manufacture Year 2017
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining Centers (Vertical)
  • Heidenhain

  • General
    Vertical-Machining centre Direct Measuring system X,Y,Z; Control: 3D-Control Heidenhain TNC 640
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-42000/1-42000/1-42000 mm/min
    Rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
    Working area 1
    Longitudinal 1450 mm
    Cross 700 mm
    Vertical 550 mm
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 60

  • Table Table surface 1760 x 750 mm
    Maximum load (table centre) 2000 Kg
    Slot width 14 mm
    Number of Slots 7
    Distance between T-Slots 100 mm
    InLine spindle 14.000 rpm HSK-A63 Spindle speed (InLine) 20 - 12.000 rpm HSK-A63 for tool taper according to DIN 69893
    Drive power (100% DC) 11,5 kW
    Spindle taper HSK-A 63
    Speed range 20 - 12000 rpm
    Torque (40% DC) 121 Nm
    Torque (100% DC) 84 Nm
    Drive power (40% DC) 14,5 kW
    Tool magazine 60 pockets HSK-A63 Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazine
    Preperation for NC-Devider EA510 indirect Preparation for NC-Divider EA510 with indirect measuring system
    Infrared measuring probe TS649 DMG Infrared touch probe make Heidenhain TS 649 DMG
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air with low oil rate
    Internal coolant supply basic package 3 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 40 Bar // 580 psi Tank capacity: 600l // 158,5 gallon Chip conveyor, Chip flushing working area Cabin roof
    Coolant-air blast change-over Coolant - Air-blast changeover external switchable via M-Function
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Special equipment Spindle speed (InLine) limited to 12,000 rpm
    DMG MORI Service Agent DMG MORI Service Agent Warning in advance - Service on time
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!

Send request

More machines from DMG MORI Global Marketing GmbH