489,291 active members
9,208 visitors online
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMC 650 V (Reference-Nr. 050955)

Manufacturer: DMG MORI, Vendor: DMG MORI Global Marketing GmbH

Request about this Machine
Price: Asking price


  • Reference number 050955
    Manufacture Year 2017
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining Centers (Vertical)
  • DMG MORI
  • Heidenhain

  • General
    Vertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: 3D-Control Heidenhain TNC 640
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-42000/1-42000/1-42000 mm/min
    Rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
    Working area 1
    Longitudinal 650 mm
    Cross 520 mm
    Vertical 475 mm
    Tool changer
    Type of magazine Wheel
    Type of gripper Double gripper
    Number of tools 30

  • Infrared measuring probe TS649 DMG Infrared touch probe make Heidenhain TS 649 DMG
    Laser tool measuring Laser tool measuring, Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Internal coolant supply basic package 3 Internal coolant supply basic package 3 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 40 Bar / 580 psi Tank capacity: 600l / 158,5 US gallons Chip conveyor, Chip flushing working area Cabin roof
    Advanced bed flushing Advanced bed flushing Additional rinsing line on the right side panel, flushing volume of the entire bed flushing is manually adjustable (only in combination with job package or internal coolant supply basic package 1,2,3,4)
    Minimum lubrication external 2 jets Minimum lubrication external via 2 jets (options cabin roof and Oil- and emulsion mist separator recommended)
    Oil- and emulsion mist separator mechanical Oil- and emulsion mist separator mechanical (only available with option cabin roof)
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air with low oil rate
    Double cartridge filter, 25 µm Double cartridge filter, Finesse of filtration 25 µm, manually reversible (only in connection with internal coolant supply basic package 2, 3, 4 possible)
    Rotating clear-view window Rotating clear-view window (only available with option cabin roof)
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Safety package for power failure Safety package for power failure: Overload limiter, Undervoltage monitoring with fast deceleration control
    Coolant-air blast change-over Coolant - Air-blast changeover external switchable via M-Function
    Coolant unit for electrical cabinet Cooling unit for electrical cabinet recommended for ambient temperatures above 35 °C up to a maximum of 50 °C
    Special equipment - Spindle speed 20-40,000rpm without shaft cooling, for tool holder HSK-E50 according to DIN69893, AC main drive with 15 / 19,5kW (100/40% ED) - Shaft cooling CSC for fishing spindle for the DMC650V - Tool magazine 30 places HSK-E50 for the DMC650V

Send request

More machines from DMG MORI Global Marketing GmbH