DMC 850 V (Reference-Nr. 051004)

•  
  Reference number 051004

  Manufacture Year 2020

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining Centers (Vertical)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Vertical-Machining centre New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	850 mm
  Cross	520 mm
  Vertical	475 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	1-42000/1-42000/1-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60

• Specification
  
  

  Table	Table surface 1160 x 570 mm
  	Maximum load (table centre) 1000 Kg
  	Slot width 14 mm
  	Number of Slots 5
  	Distance between T-Slots 100 mm
  Spindle speed 15,000 rpm, 200 Nm	Motor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible
  Tool magazine 60 pockets SK40	Tool magazine 60 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazine
  Clamping hydraulics, 2 clamping circuits	Clamping hydraulics, 2 clamping circuits 30 - 240 bar // 435 - 3,480 psi
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  Laser tool measuring autom. retractable	Laser tool measuring , automatically retractable measuring unit Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper (Option direct measuring systems recommended)
  DMG MORI Interface PROFIBUS	DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits Only in combination with an additional clamping method option!
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Internal coolant supply basic package 4	Internal coolant supply basic package 4 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 40/80 Bar // 580/1160 psi Tank capacity: 980l // 258,9 gallon Chip conveyor, Chip flushing working area Cabin roof
  Rotating clear-view window	Rotating clear-view window (only available with option cabin roof)
  Oil- and emulsion mist separator mechanical	Oil- and emulsion mist separator mechanical (only available with option cabin roof)
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Package for tropical climate for speedMASTER®	Package for tropical climate for speedMASTER® for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  DMG MORI NETSERVICE	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoT connector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines
  Special equipment	TANDEM clamping device with 1xKSH plus 160 Device clamping blocks special consisting of: 1 pc. Base plate - Dimensions: 200 x 250 x 35 mm - Version: steel, ground - suitable for your machine table DMC 850 1 pc. TANDEM KSH plus 160 - Dimensions: 160 x 160
  Special equipment	KTR 160 Standard jaws Product features: - Top jaw blank - cross offset Technical specifications: - Dimensions: 76 x 80 x 40 mm - clamping range: 0 - 120 mm Scope of delivery: 2xAufsatzbackenrohlinge Note: The mounting screws are included with the TANDE
  Special equipment	Activation takes place from the side Media connections in the base plate. There are a total of 2 connections necessary: 1x opening KSH plus 160 1x closing KSH plus 160 Total weight: approx. 30 kg
  Workpiece loading & unloading system WH 15 CELL	Workpiece loading & unloading system WH 15 CELL with 6-axis industrial robots and workpiece carrier drawers with 2 compartment; maximum possible workpiece weight of 15 kg, Robot KUKA Cybertech KR22 R1610 incl. Control and cabling, PROFIBUS interface on
  WH 15 CELL Integration kit for DMC 850 V	WH 15 CELL Integration kit for DMC 850 V Machine-specific adaptation for the protective housing on one DMC 850 V
  Triple gripper	Triple gripper Type Schunk PGN+P 80-1AS
  Alignment station	Alignment station for exact positioning of the workpiece in the gripper.
  Turning station	Turning station with gripping module and rotary module 0° / 180°
  SPC drawer	SPC drawer (only to be removed) Output of a trial workpiece for process control
  Blowing / cleaning station	Blowing - cleaning station
  4 x Workpiece carrier	4 x Workpiece carrier inlay for exact positioning of the workpiece in the storage system
  NOK discharge via slide	NOK discharge via slide Removal of bad parts after machine signal
  Workpiece management	Workpiece management - System for production in batch mix
  Robot Teachset	Robot Teachset for the new creation of workpieces / workpiece carriers as well as for the basic adjustment of the robot and / or gripper.
  4 +1 drawer	Workpiece carrier drawers with 4 + 1 compartments
  Special equipment	Workpiece-specific basic jaw set is required for the following modules: (Guideline standard part) 3x with triple gripper module 1x active gripping / turning station

I like it 0