544,157 active members*
2,861 visitors online*
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMP 70 (Reference-Nr. 051041)

Asking price

  • Reference number 051041
    Manufacture Year 2019
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining Centers (Vertical)
  • Siemens

  • General
    High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min

  • Spindle speed 24,000 rpm Spindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS) possible for pull-studs ISO 7388-3 - JD30 (MAS 403-45°) at spindlespeed higher than 20.000 rpm BBT 30 (BIG PLUS) stipulated! AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spin
    Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-ax
    Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle)
    Air blast through spindle centre Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
    Production package band filter ICS 40bar Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal
    RENISHAW touch probe-Kit RENISHAW measuring suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration tool incl. tool holder
    Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
    Safety package for power failure Safety package for power failure Overload limiter, Undervoltage moni- toring with fast deceleration control
    Manual control panel Electrical handwheel
    10 free M-functions for Siemens Free M-Codes (M180-M189) for Siemens 840D potential-free on contacts inside electrical cabinet
    Signal lamp 4-colour Signal lamp, 4 colours
    DMG MORI Interface PROFIBUS Right DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits Only in combination with an additional clamping method option!.
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!
    IoTconnector DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
    Special equipment - Clamping pneumatics, 2-circuit, including 4x 3/2 way valve - Flow monitor on internal coolant supply and external coolant supply (M7 / M8) - Active cooling control cabinet
    Workpiece loading & unloading system WH 3 CELL Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L PROFIBUS in
    WH 3 CELL Integration kit for DMP 70 WH 3 CELL Integration kit for DMP 70 Machine-specific adaptation for the protective housing on one DMP 70
    Dual gripper PGN 80 (without gripper fingers) Dual gripper Type Schunk PGN 80 with 8 mm travel per jaw (gripper fingers not included!)
    Workpiece carrier standard Workpiece carrier standard - plastic 15 Workpiece carrier 600x400 (workpiece specified inlay's not include)
    Special equipment - SPC drawer (only remove) Output of a sample workpiece for Process control - NIO discharge via chute Rejection of bad parts after Machine signal - Automatic blow-out device (Robotic hand) - Manufacturer declaration of incorporation for Automa

Send request

More products from DMG MORI Global Marketing GmbH