DMP 70 (Reference-Nr. 051094)

•  
  Reference number 051094

  Manufacture Year 2021

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining Centers (Vertical)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
  Working area 1
  Longitudinal	700 mm
  Cross	420 mm
  Vertical	380 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min

• Specification
  
  

  Clamping hydraulic, two circuits	Clamping hydraulic 2-circuit 30-240 bar manual adjustable Safety regulations according to EN 13857 must be observed.
  Tool magazine 25 places	Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.6 sec
  Production package band filter ICS 40bar	Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal
  3D Quick SET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
  Signal lamp 4-colour	Signal lamp, 4 colours
  DMG MORI Interface PROFIBUS Right	DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits Only in combination with an additional clamping method option!.
  Tropical package	Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
  Exhibition design DMP 70	Exhibition design chiller of electrical cabinet painted in electrical cabinet color; DMG-MORI set of labels; paper version of electrical plan
  Special equipment	- 24,000 rpm HIGH TORQUE - Integrated swivel rotary table (mirrored) - Rotary feed-through 6-channel - Clamping pneumatics 1-circuit - Blum precision package (TC52+LC50)
  DMG MORI Netservice - client	DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!
  Workpiece loading & unloading system WH 3 CELL	Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L PROFIBUS in
  WH 3 CELL Integration kit for DMP 35/70	WH 3 CELL Integration kit for DMP 35/70 Machine-specific adaptation for the protective housing on one DMP 35/70
  Workpiece carrier standard	Workpiece carrier standard - plastic 15 Workpiece carrier 600x400 (workpiece specified inlay's not include)
  SPC drawer	SPC drawer (only to be removed) Output of a trial workpiece for process control
  Not OK discharge via slide	Not OK discharge via slide Removal of bad parts after machine signal
  Package for tropical climate WH 3 CELL	Package for tropical climate WH 3 CELL for ambient temperature max. 50°Celsius include separate active cooling unit for electrical cabinet
  Special equipment	- Robot colour calcite-white - 2-compartment gripper type Schunk PGN 80 - 2 sets of workpiece-specific gripper fingers - Workpiece-specific inlays, 3 pieces - Pneumatic overfeed - Robot Teachset - Battery compartment outside - Menu-guided input programmin

I like it 0