CMX 70 U (Reference-Nr. 010962)

•  
  Reference number 010962

  Manufacture Year 2020

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Universal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control
  Working area 1
  Longitudinal	750 mm
  Cross	600 mm
  Vertical	520 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min
  Floor space/Weight
  Dimensions (L x W x H)	5,12 x 4,34 x 2,89 m
  Weight approx.	8000 Kg

• Specification
  
  

  Swivel Rotary Table Powered B/C Axes	Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!
  	Type of Measuring system Direct measuring system
  	Table surface Ø 800 x 620 mm
  	Maximum load (table centre) 350 Kg
  	Slot width 14 mm
  	Mode for positioning only
  	5. Axes (swivelling range) -10/+95 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Distance between T-Slots 63 mm
  	Number of Slots 9
  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  Technology cycle MPC 2.0	Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For SIEMENS control
  ATC (Application Tuning Cycle) / Siemens	Technology cycle ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy / surface / speed Operator can set the optimum cutting method simply by selecting either the time priority mode or accuracy priority mode
  Pro Time	PROTime Electronic display Display functions: - Remaining machining time - Remaining parts to be produced - Machine status
  Software option DXF Import (Siemens)	Software Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program. For SIEMENS control
  Production Package 3 with Chip Conveyor	Production Package 3 Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 300 l (left) - Bed and ATC arm flushing via M-Function; - Coolant spray gun for swar
  inlineMASTER® spindle 15.000 rpm	inlineMASTER® spindle 15.000 rpm Spindle speed range 20 to 15.000 rpm Tool Taper HSK-A 63 Power: 20kW (40% DC) / 14,5kW (100% DC) Torque: 121 Nm (40% DC) / 84 Nm (100% DC) bearings oil-air lubrication chiller unit 150 W for main drive (different from st
  Tool Magazine 60 places	Tool Magazine 60 places HSK-A 63 Option includes: - Tool magazine 60 places with double gripper; chain type, servo drive - Tool (Un-) Loading through Magazine Door during AUTO Mode - Tool magazine door - Automatic magazine shutter (instead of bru
  Air coolant internal (through spindle centre)	Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
  3D quickSET	3D quickSET Tool Kit for control and compensation of the cinematic accuracy of 5-Axis machine configurations, inclusive preparation (only with option Touch Probe)
  Machine preparation for PH 150	Machine Preparation for DMG MORI Pallet loading / unloading system PH 150 Option includes: - Automatic lift door on right cabin side - Robot interface (DMG MORI Standard) - Hydraulic / pneumatic preparation with 4 channels on the machine table (to exp
  DMG ECOLINE Twin Probe-Kit for Siemens	Ecoline touch probe-Kit for Siemens control, consisting of: - PP40 touch probe with optical signal transmission; - TS27R probe for tool measurement; - calibration tool; - calibration ring; - case for equipment. Direct measuring system recommended
  DMG MORI Messenger	DMG MORI Messenger Installation kit for the connection of one machine.
  NETservice	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoTconnector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  Special equipment	Special chip conveyor dedicated for small chips

I like it 0