CTX gamma 2000 TC (Reference-Nr. 071282)

•  
  Reference number 071282

  Manufacture Year 2019

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  - partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS with Siemens 840D sl Operate
  Working area
  Swing diameter over guide ways	700 mm
  Turning diameter	630 mm
  Distance between spindles	2260 mm
  Clamping chuck diameter max.	400 mm
  Bar diameter max.	102 mm
  Main drive 1
  Drive power (100% DC)	33 kW
  Drive power (40% DC)	40 kW
  Speed range	- 4000 rpm
  Torque (100% DC)	580 Nm
  Max. torque (40% DC)	700 Nm
  C-Axis Speed	-4000 rpm
  Torque of C-Axis (holding torque)	1100 Nm
  Accuracy at point stopping	0,001 degree
  Turning-milling spindle
  Spindle taper	HSK-63A DIN 69893
  Spindle speed	-12000 rpm
  Drive power (40% DC)	36 kW
  Drive power (100% DC)	27 kW
  Torque (100% DC)	160 Nm
  Torque (40% DC)	220 Nm
  locking moment	1700 Nm
  Tool magazine
  Number of tools	80
  Max. tool length	400 mm
  Max. tool diameter	80 mm
  Max. tool weight	12 Kg
  Floor space/Weight
  Dimensions (L x W x H)	7,48 x 2,61 x 2,87 m
  Weight approx.	24000 Kg

• Specification
  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  5-axis simultaneus machining	5-axis simultaneous machining
  Program state control	With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines.
  Relieve cycle	Retraction of the axes at your fingertips in the end positions (only for outside machining) By pressing a button, the X-axis drive in manual mode on the positive end positions. Prepare for use as a rescue function or around the work area to set up.
  Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
  3D quickSET (with toolkit)	3D QuickSET for turn-mill machines - Toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5-
  DXF-Reader for Siemens	DXF-Reader for Siemens direct on the control for the import of DXF-files as contour or position sample. - support of layer and colours - selection of geometry elements
  Design version BLACK	Design version BLACK Working area door, front cover beneath Working area door and front pane frame in colour deep black
  Z1 axis with linear drive	Z1 axis with linear drive Rapid travers Z1 axis 70 m/min (229.6 ft/min) Feed force Z1 axis 10.4 kN (2338 lbf)
  Turret 12-fold VDI 40 with tool drive	Star type turret, 12-fold with tool drive, reception 40 mm (1.575 inch) DIN 69880, radial - Lower compound slide (X2/Z2), AC servo drives with ball screws, absolute, direct measuring system
  Tailstock function for the counter spindle	Tailstock function for the counter spindle incl. foot switch. Mechatronic control of the supporting force, selectable per program Feed force: 3 - 20 kN
  Counter spindle ISM 76	Counter spindle as integrated spindle motor ISM 76 - Drive power 25/32 kW (S1-100%d.c. / S3-40%d.c.) - Torque 280/360 Nm (S1-100%d.c. / S3-40%d.c.) - Speed range 0-5000 rpm - Partial hollow clamping (hydraulic) - Draw tube ID 67 mm - C-axis and sp
  Extension of the discharge chute about 300 mm	Extension of the discharge chute at the chip conveyor about 300 mm
  BFU 8/20 bar, freq. con., 600 l	Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/80 litre/min   and 20 bar/40 litre/min   (116.psi/20.8 gal/min   and 290 psi/10.5 gal/min) with frequency-controlled pumps   programmable via M-functions   coolant s
  Hinged typ chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  Workpiece touch probe RMP60, Renishaw	Workpiece touch probe RMP60, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Note: Custom
  Tool measuring device, BLUM with chain magazine	Tool measuring device make BLUM for fixed and rotating tools in the turning/milling spindle in combination with chain magazine
  Sensor package Industry 4.0	Sensor package Industry 4.0 for holistic condition monitoring with visualization in Condition Analyser App and analysis of the machine and the machining processes (Attention: The DMG Mori Condition Analyser App is not part of this option)
  Additional magaz. above tailstock or counter sp.	Additional magazine above the tailstock or counter spindle (right side), 6 tool mountings with tool reception HSK 63-A 4 places max. length 700 mm (27.56 in), max. dia. 80 mm (3.15 in) 2 places max. length 360 mm (14.17 in), max. dia. 160 mm (6.3 in) or m
  Chain magazine for 80 tools HSK-A 63	Tool magazine, 80-fold chain magazine instead of 36-fold disc magazine, tool reception HSK-A 63 DIN 69893
  3-jaw chuck, BHD 315-95, make SMW	3-jaw power clamping chuck with through-hole, type BHD 315/95, make SMW-Autoblok incl. connecting elements
  3-jaw chuck, BHD 315-95, make SMW	3-jaw power clamping chuck with through-hole, type BHD 315/95, make SMW-Autoblok incl. connecting elements
  Tool cone cleaning device	Tool cone cleaning device at chain magazines - The cleaning is done with two counter rotating brushes and compressed air when changing tools - Designed for the following tools: HSK 63, HSK 100, Capto C6 or Capto C8
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Ligh switch cabinet	Ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 V, 2 A load, make Rittal on lott via Transformer chead main switch
  Minimess test point couplings for hydraulic	Minimess test point couplings for hydraulic Minimess connections (M16x2) before and after all hydraulic actuators for monitoring and diagnosis
  Package for increased ambient temperature	Package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
  DMG MORI NETSERVICE	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoT connector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines

I like it 0