DMC 65 monoBLOCK (Reference-Nr. 020265)

•  
  Reference number 020265

  Manufacture Year 2017

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  General
  Universal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	735 mm
  Cross	650 mm
  Vertical	560 mm
  Floor space/Weight
  Weight approx.	16800 Kg

• Specification
  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC swivel rotary table with pallet carrier	Table surface 500 x 500 mm
  	Centre bore 50 mm
  	Maximum load (table centre) 500 Kg
  	5. Axes (swivelling range) +/- 120 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Distance between T-Slots 100 mm
  	Number of Slots 5
  	Slot width 14 mm
  Rotary pallet storage RS 6 incl. 6 pallets	Rotary pallet storage RS 6 incl. 6 pallets d 500 mm x 500 mm / 19.7 in x 19.7 in T-slots following DIN 55201-A2 (6 pallets in total for machine with storage)
  Motor spindle 20,000 rpm	Motor spindle speedMASTER® Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Tool magazine, chain vert., 180 pockets	Tool magazine Vertical chain magazine with 180 tool pockets
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine)
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Infrared measuring probe Heidenhain	Infrared measuring probe Type Heidenhain TS 649
  Tool breakage control mechanical	Tool breakage control mechanical version
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Production package 40 bar/23 l/min, 600 l tank	Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar / 23 l/min - 580 psi / 6 gpm through spindle centre (AD) External
  Rotating clear-view window	Rotating clear-view window cabin door
  Coolant tempering	Coolant tempering for internal coolant unit 600 lt / 160 gallon: Increased tank 980 lt / 259 gallon Heating capacity max.: 3,000 W / 4 hp Cooling capacity max.: 3,800 W / 5.1 hp
  Spray pistol with pump	Spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Oil and emulsion mist separator	Oil and emulsion mist separator Mechanical filter Throughput volume 600 m³/h
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  Special equipment	- Feed drives X-/Y-axis with liquid cooling - Recirculating ballscrew spindle Y-/Z-axis with liquid cooling

I like it 0