525,939 active members*
2,866 visitors online*
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMU 200 Gantry (Reference-Nr. 040684)

Asking price

  • Reference number 040684
    Manufacture Year 2017
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • Siemens

  • General
    Portal milling machine in gantry design; Control: CELOS with Siemens 840D sl Operate
    Working area 1
    Longitudinal 2000 mm
    Cross 2000 mm
    Vertical 1200 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical -50000/-50000/-50000 mm/min
    Rapid traverse longitudinal/transverse/vertical 50/50/50 m/min

  • Toolchanger toolchanger
    Type of magazine Wheel
    Number of tools 30
    Max. tool weight 6 Kg
    Max. tool length 300 mm
    Max. tool diameter with occupied adjacent pockets 80 mm
    Max. tool dia. with free neighbouring pockets 130 mm
    Direct measuring system X,Y,Z Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
    5-Axes version with 90° kinematics 5-Axes version with 90° kinematics NC- 2-axes 90° swivel head (A- and C-axis) A +/- 120° swivel torque 2.000 Nm 1,475.12 ft lbs (40% duty) C +/- 300° swivel torque 2.700 Nm 1,991.41 ft lbs tool clamping HSK 63 according to DIN69893 (different f
    Spindle speed 28.000 rpm Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 Only for 90° milling head ! (different from standard)
    Internal coolant supply 80bar/980l Internal coolant supply ICS paper band filtration 80 Bar/980 l, frequency controlled inclusive: air purge for linear measuring system, rotary joint for main spindle, cabin roof work area flushing 10 bar/37l/min - 80 bar/31 l/min through spindle centre (
    Oil and emulsion mist separator Oil and emulsion mist separator system 2 mechanical filter units each 1600 m³/h // 98.1 yd³/h Only in combination with option cabin roof. Not in combination with preparation for dust extraction.
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air, low oil rate possible
    Infrared measuring probe TS649 DMG Infrared touch probe TS649 DMG
    3D quickSET elevated constructuion 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    NETSERVICE (CELOS) Netservice Qualified support by Internet-based remote diagnostics
    SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
    MESSENGER (CELOS) MESENGER (CELOS) Clear live status of the networked machines

Send request

More machines from DMG MORI Global Marketing GmbH