532,190 active members*
3,440 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMU 40 eVo (Reference-Nr. 040676)

Asking price


  • Reference number 040676
    Manufacture Year 2018
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Siemens

  • General
    Universal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate
    Technical Data
    Feed rate longitudinal/transverse/vertical 80000/80000/80000 mm/min
    Rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
    Working area 1
    Longitudinal 400 mm
    Cross 400 mm
    Vertical 375 mm
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 60
    Max. tool weight 6 Kg
    Max. tool length 300 mm
    Max. tool diameter with occupied adjacent pockets 80 mm
    Max. tool dia. with free neighbouring pockets 130 mm
    Floor space/Weight
    Dimensions (L x W x H) 6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) m
    Weight approx. 7200 Kg

  • Dynamic package DMU 40 eVo linear Dynamic package for DMU 40 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Active chiller for main spindle, lineardrives and table
    NC swivel rotary table NC rotary table with swivel axis, incl. cooling of the table
    Type of Measuring system Direct measuring system
    Table surface 450 x 400 mm
    Centre bore 30 mm
    Maximum load (table centre) 250 Kg
    Rotation Speed 5. Axis 60 rpm
    5. Axes (swivelling range) -5/+110 degree
    4. Axes (swivelling range) 360 x 0,001 degree
    Rotation speed max.4. Axis 60 rpm
    Distance between T-Slots 63 mm
    Number of Slots 5
    Slot width 14 mm
    Spindle speed 20.000 rpm, HSK-A63 Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
    Chain-type tool magazine 60 pockets Tool magazine with 60 positions, chain type with double gripper (differently from standard)
    Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    3D Quick SET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
    Laser tool measuring,swiveling Laser tool measuring of tool length and diameter, automatically turn away of the measuring unit under table level including Calibration tool
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Swarf conveyor, apron conveyor Swarf conveyor,type apron conveyor recommended for large swarf and thread swarf
    Internal coolant supply 40 bar / 600l Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon air purge for linear measuring system, bed flushing
    Oil and emulsion mist separator Oil and emulsion mist separator mechanical
    Extended swarf flushing Extended swarf flushing Additional flushing of the working area door left hand side, y axis and right cabin wall volume of the flushing adjustable manual (only in combination with internal coolant)
    Double cartridge filter,25 µm Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
    DMG MORI Interface PROFIBUS DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits control panel mounted on the left hand side of the machine bed Only in combination with an ad
    Actuation zeropoint clampingsystem EROWA UPC Pneumatic actuation zero point clamping system EROWA UPC including rotary joint 2 active pneumatic channels pneumatic release pressure 6 bar (actuation of other clamping systems only with prior consultation of Technical Sales!)
    Package tropical climate(dynamic vers.) Package for tropical climate for dynamic version for ambient temperature max.50°Celsius: includes blocking air for linear measuring system, temperature control of hydraulic oil
    Air blast through spindle centre Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
    Safety glass at operators door Laminated safety glass at the operators door, side glass polycarbonate preferably for combination with automation cabin
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Energy meter for Siemens 840 sl OP CELOS Energy meter for 3D control Siemens 840D solutionline Operate with CELOS
    NETSERVICE (CELOS) Netservice Qualified support by Internet-based remote diagnostics
    SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
    MESSENGER (CELOS) MESENGER (CELOS) Clear live status of the networked machines
    Special equipment Preparation for Renishaw Sprint System Standard Installation elements (no screw feet) PH 150 with handling system PH 150 integration kit UPC-P chuck 10x UPC pallets 320x320 incl. clamping pin and pallet coupling Erowa Alu grid 50mm Z-support steel CE

Send request

More machines from DMG MORI Global Marketing GmbH