538,105 active members*
2,601 visitors online*
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMU 40 eVo (Reference-Nr. 040717)

Asking price

  • Reference number 040717
    Manufacture Year 2019
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • Heidenhain

  • General
    Universal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640
    Technical Data
    Feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
    Rapid traverse longitudinal/transverse/vertical 50/50/50 m/min
    Working area 1
    Longitudinal 400 mm
    Cross 400 mm
    Vertical 375 mm
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 210
    Max. tool weight 6 Kg
    Max. tool length 300 mm
    Max. tool diameter with occupied adjacent pockets 80 mm
    Max. tool dia. with free neighbouring pockets 130 mm
    Floor space/Weight
    Dimensions (L x W x H) 4,29 x 7,63 x 2,72 m
    Weight approx. 7800 Kg

  • NC swivel rotary table NC rotary table with swivel axis, incl. cooling of the table
    Type of Measuring system Direct measuring system
    Table surface 450 x 400 mm
    Centre bore 30 mm
    Maximum load (table centre) 250 Kg
    Slot width 14 mm
    Number of Slots 5
    Rotation Speed 5. Axis 60 rpm
    5. Axes (swivelling range) -5/+110 degree
    4. Axes (swivelling range) 360 x 0,001 degree
    Rotation speed max.4. Axis 60 rpm
    Distance between T-Slots 63 mm
    Spindle speed 20.000 rpm, HSK-A63 Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
    Chain-type tool magazine 210 pockets Tool magazine with 210 positions, chain type with double gripper (differently from standard)
    Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
    Infrared measuring probe TS 649 DMG Infrared touch probe make Heidenhain TS 649 DMG
    Tool breackage control TRS2 Tool breackage control TRS2 Tool breackage control contact free for tools with solid core,diam. >= 0,2 mm checking speed: 5000,1000 or 200 rpm
    Internal Coolant Supply 80bar/980l frequency control Internal coolant supply for spindle ICS with paper type filter Papertype-Filter 20 - 80 Bar // 290 -1160 psi frequency controlled 980-l tank // 25 / 17 l/min/ 258.9 gallon tank 6.6 /4.5 gallon/min air purge for linear measuring system bed flushing
    Oil and emulsion mist separator Oil and emulsion mist separator mechanical
    Extended swarf flushing Extended swarf flushing Additional flushing of the working area door left hand side, y axis and right cabin wall volume of the flushing adjustable manual (only in combination with internal coolant)
    DMG MORI Interface PROFIBUS DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits control panel mounted on the left hand side of the machine bed Only in combination with an ad
    Pneum. unclamping pressure increaser to max. 8bar Pneumatic unclamping pressure increaser to max. 8bar Extension of base system 6 bar pneumatic booster integrated in the machine necessary in case of for example MTS or MTS+
    Air blast through spindle centre Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
    DMG MORI NETSERVICE DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
    IoT connector DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
    SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
    MESSENGER (CELOS) MESENGER (CELOS) Clear live status of the networked machines
    3D data model 3D data model in STEP format for integration in a CAD system by the customer. It is used for machine simulation. (Delivery against signed Confidentiality Agreement)
    Special equipment KEH-SONS DMG MORI DNC - Ethernet interface for job management 5.1 for Heidenhain -Program selection and program transfer by the job manager on the automation side via Ethernet -Priority and sequence control depending on resources Tool check / determinatio

Send request

More machines from DMG MORI Global Marketing GmbH