DMU 40 eVo (Reference-Nr. 040759)

•  
  Reference number 040759

  Manufacture Year 2022

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Heidenhain
• Description
  
  

  General
  Universal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Rapid traverse longitudinal/transverse/vertical	50/50/50 m/min
  Feed rate longitudinal/transverse/vertical	50000/50000/50000 mm/min
  Working area 1
  Longitudinal	400 mm
  Cross	400 mm
  Vertical	375 mm
  Tool changer
  Type of gripper	Double gripper
  Type of magazine	Chain
  Number of tools	60
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm
  Floor space/Weight
  Weight approx.	6800 Kg
  Dimensions (L x W x H)	6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) m

• Specification
  
  

  Spindle speed 28.000 rpm HSK-A63	Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)
  Chain-type tool magazine 60 pockets	Tool magazine with 60 positions, chain type with double gripper (differently from standard)
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  3D Quick SET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
  Signal lamp 4-colour	Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
  Internal coolant supply 40 bar / 600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon air purge for linear measuring system, bed flushing double cartridge filter 50µm for internal coolant
  Extended swarf flushing	Extended swarf flushing Additional flushing of the working area door left hand side, y axis and right cabin wall volume of the flushing adjustable manual (only in combination with internal coolant)
  Oil and emulsion mist separator	Oil and emulsion mist separator mechanical
  Double cartridge filter,25 µm	Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
  EROWA Automation Interface PH 150 / PH CELL	Automation interface PH 150 / PH CELL for EROWA zero point clamping system consisting of: Interface (Profibus) via M65 Working table with 4-channel rotary joint Automatic loading door Control of EROWA (MTS / UPC) Zero-point clamping system Automation Soft
  Air blast through spindle centre	Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
  proTIME	proTIME Visualisation of remaining runtime, remaining workpieces and the machine state
  Exhibition design eVo	Exhibition design DMU eVo chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; door media supply; paper version of electrical plan
  Safety glass at operators door	Laminated safety glass at the operators door, side glass polycarbonate preferably for combination with automation cabin
  Safety package for power failure (incl. IPC)	Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overvoltage limiter, Undervoltage monitoring with fast deceleration control
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  3D data model	3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)
  NETSERVICE (CELOS)	Netservice Qualified support by Internet-based remote diagnostics
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  SERVICEcamera	SERVICEcamera Camera set incl. accessories (Antenna, charger, incl. SD card)
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Pallet loading / unloading system PH 150 FAMOT	With handling arm and pallet magazine 1. 10-positions rotary pallet magazine 2. Max. load of the handling arm up to 150 kg (including pallet weight) 3. Design in accordance with the machine 4. 2 servo axes (X-axis and rotary table of magazine) 5. Pn
  Special equipment	Infrared touch probe Make Renishaw PP400 optical(OMP400) Pneumatic setup aid for tool loading Laser tool measurement BLUM DIGILOG Measurement of tool length and diameter automatic swiveling of the measuring unit below table level Calibration mandrel wit
  Special equipment	Mold package linear incl. B-/C-Torque dynamic package V-toothed Eagle belts in the Z-axis B-/C- Torque table (swivel rotary table with star grooves) incl. ATC with weight specification High end cooler for machine; AVD - Heidenhain Top Speed - Siemens SMC
  PH 150 FAMOT Integration-Kit for DMU 40 eVo	PH 150 FAMOT integration kit for DMU 40 eVo linear. Note: Machine must be equipped with CELOS.
  PH 150 FAMOT system enhancement to max. 250 kg	PH 150 FAMOT system enhancement to max. pallet load up to 250 kg Note: Please consider max. permissible table load of machine tool.
  Clamping station EROWA UPC-P	Clamping station EROWA UPC-P for gripping pallets on machine table for pallet size 320 x 320
  5 x Aluminum pallet 320 x 320 EROWA, smooth surface	5 x Aluminum pallet 320 x 320 including clamping pins Smooth surface of the pallet without mounting holes Clamping system EROWA UPC-P
  Remark: machine preparation for automation	Remark: The machine must be prepared for the automation mode. Required option: Machine Preparation for DMG MORI Pallet loading / unloading system PH 150 Regular option Automation Package is not required.
  Jobmanager - Control Comfort Plus	Jobmanager - Control Komfort Plus includes additional to the basic version different options more, to ensure a better utilization and flexibility of the automation cell. - Selection of multiple different NC-programs for one pallet; - Collecting machine
  CE declaration	CE declaration for entire system (machine + PH 150 FAMOT). Note: Option is required for the following machines: - DMU 50 3rd generation, - DMU 40 / 60 / 80 eVo linear, - DMC 650 / 850 / 1150 / 1450 V, - DMU 65 / 75 mB, - HSC 55 / 75 / 105 linear.

I like it 0