467,695 reg. members
DMG MORI
1175
Following
DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0)5205/74-0
+49 (0) 52 05 / 74-30 09
Route planner

DMU 50 (Reference-Nr. 010718)

Manufacturer: , Vendor: DMG MORI Global Marketing GmbH

Request about this Machine
Price: Asking price


  • Reference number 010718
    Manufacture Year 2016
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • Heidenhain

  • General
    Universal milling machine, with compound Guideway construction New DMG MORI Design; Control: 3D Control Heidenhain iTNC 530 HSCI
    Working area 1
    Longitudinal 500 mm
    Cross 450 mm
    Vertical 400 mm
    Technical Data
    Type of main drive AC
    Drive power (100% DC) 14,5 kW
    Drive power (40% DC) 20,3 kW
    Speed range 20 - 14000 rpm
    Spindle taper SK 40 DIN 69871
    Feed rate longitudinal/transverse/vertical -30000/-30000/-30000 mm/min
    Rapid traverse longitudinal/transverse/vertical 30/30/30 m/min
    Miscellaneous
    Clamping System DIN 69872
    Floor space/Weight
    Dimensions (L x W x H) 4,15 x 3,98 x 2,75 m
    Weight approx. 4500 Kg

  • Half cabin -
    Swivel Rotary Table, simultaneous Swivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!
    Table surface 630 x 500 mm
    Centre bore 30H6 mm
    Maximum load (table centre) 300 Kg
    Slot width 14 mm
    Number of Slots 7
    Distance between T-Slots 63 mm
    Tool magazine 30 po SK40 vertical chain Tool magazine 30 places SK40 Vertical chain with double gripper incl. set up station for tool loading
    Electronic handwheel -
    Direct mesasuring system X/Y/Z -
    3D Quick SET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
    Infrared measuring probe TS649 Infrared touch probe make Heidenhain TS 649 option direct measuring system recommended
    Tool measuring device Heidenhain TT160 Tool measuring device Heidenhain TT160 Tool length and diameter measurement with Cleaning air-blast, Calibration Tool
    Swarf conveyor Swarf conveyor, scraper type
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air with low oil rate
    Spray Gun f. Swarf Removal -
    Coolant-air blast change-over Coolant - Air-blast changeover external switchable via M-Function
    Additional door on the right side -
    Operation mode 4 Operation mode 4 "Process monitoring in the production" Manual intervention with open doors of machining area. Release after check list has been filled in.
    DMG MORI Messenger DMG MORI Messenger Installation kit for the connection of one machine.
    DMG Netservice - client DMG Netservice - client Green light for your machine Will be installed on an external PC!

Send request

More machines from DMG MORI Global Marketing GmbH