512,917 active members
3,064 visitors online
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMU 50 (Reference-Nr. 010893)

Asking price


  • Reference number 010893
    Manufacture Year 2018
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Siemens

  • General
    Universal Milling Machine; Control: CELOS with Siemens 840D sl Operate
    Working area 1
    Longitudinal 650 mm
    Cross 520 mm
    Vertical 475 mm
    Technical Data
    Type of main drive AC
    Drive power (100% DC) 25 kW
    Drive power (40% DC) 35 kW
    Speed range 20 - 20000 rpm
    Spindle taper HSK-A 63
    Clamping System HSK-A 63
    Feed rate longitudinal/transverse/vertical -42000/-42000/-42000 mm/min
    Rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
    Floor space/Weight
    Dimensions (L x W x H) 6,40 x 5,75 x 2,75 m
    Weight approx. 7500 Kg

  • Direct measuring system Direct path measuring system
    Spindle speed 20.000 rpm Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
    NC swivel rotary table Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
    Tool magazine 60 pockets Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
    Swarf conveyor Swarf conveyor, scraper type Not suitable for unmanned operation! (differently from standard)
    Internal coolant supply 40bar/600l Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, (defferently from standard)
    Coolant-air blast change-over Coolant - Air-blast changeover external switchable via M-Function
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air with low oil rate
    Chip flushing for working area Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS)
    Double cartridge filter, 25 µm Double cartridge filter, Finesse of filtration 25 µm, manually reversible (only in connection with separate paper-type filter)
    Rotating clear-view window Rotating clear-view window (only available with option cabin roof)
    Oil- and emulsion mist separator mechanical Oil- and emulsion mist separator mechanical (only available with option cabin roof)
    Infrared measuring probe TS649 DMG Infrared touch probe make Heidenhain TS 649 DMG
    Laser tool measuring Laser tool measuring, fix mounted at machine column Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
    3D Quick SET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Signal lamp 4-colour Signal lamp 4 colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    DMG MORI Interface PROFIBUS DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits Only in combination with an additional clamping method option!.
    Prep. for robot actuated clamping system control Preparation for robot actuated clamping system control max. 4 channel rotary joint Media connection on the face side of the table an actuation of clamping system by machine in single mode is not possible
    Exhibition design DMU50 3rd generation Exhibition design DMU 50 3rd chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    DMG MORI NETSERVICE DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
    IoT connector DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
    SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
    MESSENGER (CELOS) MESENGER (CELOS) Clear live status of the networked machines
    Special equipment - proTime display - Clamping hydraulics 2 circuits incl. 4-times rotary feedthrough

Send request

More machines from DMG MORI Global Marketing GmbH