482,484 reg. members
DMG MORI
1791
Following

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0)5205/74-0
+49 (0) 52 05 / 74-30 09

Route planner

Route planner

DMU 60 eVo (linear) (Reference-Nr. 040568)

Manufacturer: , Vendor: DMG MORI Global Marketing GmbH

Request about this Machine
Price: Asking price


  • Reference number 040568
    Manufacture Year 2015
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • Heidenhain

  • General
    Universal machining centre; Control: 3D Control Heidenhain iTNC 530 HSCI
    Technical Data
    Feed rate longitudinal/transverse/vertical 80000/80000/80000 mm/min
    Rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
    Working area 1
    Longitudinal 600 mm
    Cross 500 mm
    Vertical 500 mm
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 30
    Max. tool weight 6 Kg
    Max. tool length 300 mm
    Max. tool diameter 80 mm
    Max. tool dia. with free neighbouring pockets 130 mm
    Floor space/Weight
    Dimensions (L x W x H) 4,7 x 6,0 x 2,8 m
    Weight approx. 12200 Kg

  • Dynamic package DMU 60 eVo linear Dynamic package for DMU 60 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Active chiller for main spindle, lineardrives and table
    Spindle speed up to 18,000 rpm HSK-A63 Spindle speed up to 18,000 rpm HSK-A63 AC-Motor spindle vertical, digital controlled Lubrication: oil-air lubrication Spindle cooling: circulating water cooling adaption of spindle and tool magazin (differently from standard)
    Drive power (100% DC) 25 kW
    Drive power (40% DC) 35 kW
    Torque (100% DC) 87 Nm
    Torque (40% DC) 130 Nm
    Speed range 20 - 18.000 rpm
    Spindle taper HSK-A 63
    Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Pallet changer DMU 60 eVo Pallett changer incl. 2 pallets 500x500 mm / 19.6x19.6 in Pallet version bore pattern for pallet Clamping surface following DIN 55201-A1 grid 100 x 100 mm / 3.93 x 3.93 in bore hole D12 F7, tapped bushing M12
    NC swivel rotary table with pallet carrier NC swivel rotary table with pallet carrier - direct measuring systems, - incl. cooling of the table
    Table surface 500 x 500 mm
    Maximum load (table centre) 400 Kg
    Clamping grid 100 x 100 mm
    Rotation speed max.4. Axis 60 rpm
    4. Axes (swivelling range) 360 x 0,001 degree
    5. Axes (swivelling range) -5/+110 x 0,001 degree
    Rotation Speed 5. Axis 60 rpm
    Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3 quickSET for one machine. 5 axis machine configurations (only with option touch probe)
    Infrared measuring probe TS 649 DMG Infrared touch probe make Heidenhain TS 649 DMG
    Laser tool measuring,swiveling Laser tool measuring of tool length and diameter, automatically turn away of the measuring unit under table level including Calibration tool
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Internal coolant supply 40 bar / 600l Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotating clear-view window, air purge for linear measuring system, bed flushing
    Oil and emulsion mist separator Oil and emulsion mist separator mechanical
    Extended swarf flushing pallet machine Extended swarf flushing pallet machine Additional flushing y axis volume of the flushing adjustable manual (only in combination with internal coolant)
    Spray gun for swarf removal -
    Air blast through spindle centre Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
    Swarf conveyor Swarf conveyor, scraper type with slotted hole screen
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Application Tuning Cycle ATC-Software Application Tuning Cycle ATC-Software Selection of the optimal milling mode for the next machining-step
    Electronic handwheel -
    Operation mode 4 Operation mode 4 "Process monitoring in the production" Manual intervention with open doors of machining area. Release after check list has been filled in.
    DMG MORI Messenger - Installation kit DMG MORI Messenger Installation kit (connection 1. machine) SIE 840D; HDH iTNC530; HDH MillPlus iT; HDH TNC620/640; MAPPS via MTConnect
    DMG MORI Netservice - client DMG Netservice - client Green light for your machine Will be installed on an external PC!

Send request

More machines from DMG MORI Global Marketing GmbH