DMU 60 eVo (linear) (Reference-Nr. 040710)

•  
  Reference number 040710

  Manufacture Year 2013

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Heidenhain
• Description
  
  

  General
  Universal machining centre; Control: 3D Control Heidenhain iTNC 530 HSCI
  Technical Data
  Feed rate longitudinal/transverse/vertical	50000/50000/50000 mm/min
  Rapid traverse longitudinal/transverse/vertical	50/50/50 m/min
  Working area 1
  Longitudinal	600 mm
  Cross	500 mm
  Vertical	500 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm
  Floor space/Weight
  Dimensions (L x W x H)	4,7 x 6,0 x 2,8 m
  Weight approx.	9850 Kg

• Specification
  
  

  Spindle speed up to 18,000 rpm SK40	Spindle speed up to 18,000 rpm SK40 Spindle cooling: water circulating cooling (differently from Standard)
  	Drive power (100% DC) 25 kW
  	Drive power (40% DC) 35 kW
  	Torque (100% DC) 87 Nm
  	Torque (40% DC) 130 Nm
  	Speed range 20 -18000 rpm
  	Spindle taper SK 40 DIN 69871
  Chain-type tool magazine 60 pockets	Tool magazine with 60 positions, chain type with double gripper (differently from standard)
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC swivel rotary table	NC swivel rotary table - direct measuring systems, - incl. cooling of the table
  	Table surface 600 x 500 mm
  	Centre bore 30 H6 mm
  	Maximum load (table centre) 400 Kg
  	Rotation Speed 5. Axis 60 rpm
  	5. Axes (swivelling range) -5/+110 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 60 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 7
  	Slot width 14 mm
  3D Quick SET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
  Infrared measuring probe TS 649 DMG	Infrared touch probe make Heidenhain TS 649 DMG
  Laser tool measuring on rigid support	Laser tool measuring Laserbridge mounted on rigid support including Calibration tool
  Internal coolant supply 40 bar / 600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotating clear-view window, air purge for linear measuring system, bed flushing
  Oil and emulsion mist separator	Oil and emulsion mist separator mechanical
  Swarf conveyor	Swarf conveyor, scraper type with slotted hole screen
  Preparation handling system DMG Automation	Preparation handling system PH 150-8 of DMG Automation
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Special equipment	Duplex filters switchable

I like it 0