DMU 65 monoBLOCK (Reference-Nr. 011032)

•  
  Reference number 011032

  Manufacture Year 2019

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Universal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Working area 1
  Longitudinal	735 mm
  Cross	650 mm
  Vertical	560 mm
  Tool changer
  Type of gripper	Double gripper
  Tool changer plane	vertical
  Number of tools	60
  Max. tool length	315 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	160 mm
  Floor space/Weight
  Weight approx.	12300 Kg

• Specification
  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC swivel rotary table tandem drive	NC swivel rotary table tandem drive Table plate C-axis: d 650 mm / 25.6 in, integrated in rigid table 800 mm x 650 mm / 31.5 in x 25.6 in Table plate C-axis: 1x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8x T-slot 14 H12 / 0.55 H7 (clamping
  Package Mill / Turn HSK-A 63	Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1
  Tool magazine, chain vert., 60 pockets	Tool magazine Vertical chain magazine basic with 60 magazine pockets SK 40 or optionally chosen spindle taper
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Infrared measuring probe Renishaw	Infrared measuring probe Type Renishaw OMP 60 SK 40 or optionally chosen spindle taper
  Tool measuring in machining area Blum Laser FD	Tool measuring in machining area Blum Laser DIGILOG Laser-system for milling tools, 3D touch-probe for turning tools
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Prod. package 80 bar, 980 l, frequency contr. (MT)	Production package (M / T): belt chip conveyor with coolant unit 980 l / 259 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply frequency controlled 10 bar/37l/min - 80 bar/31 l/min - 145 psi/9.7
  Coolant tempering/internal coolant supply	Coolant tempering for internal coolant unit 980 lt / 259 gallon Heating capacity max.: 3,000 W / 4 hp Cooling capacity max.: 3,800 W / 5.1 hp
  Coolant ring jet	Coolant ring jet for vertical headstock, 16 water jets, 7 air jets
  SGS Spindle Growth Sensor	SGS Spindle Growth Sensor Compensation of the axial displacement of the motor spindle by an integrated spindle-growth sensor.
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  VCS Complete extension package	VCS Complete extension package for each further machine: software / password (only in conjunction with option measuring probe or existing set of measuring tools)
  Maintenance Package I4.0	Maintenance Package I4.0: - measurement of tool pull-in force - autom. lubrication of tool clamp - monitoring of pneumatics
  Spray pistol 3 bar - 40 l/min	Spray pistol 3 bar - 40 l/min 43 psi / 10.4 gallon/min (theoretical pump performance)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Oil and emulsion mist separator	Oil and emulsion mist separator Mechanical filter Throughput volume 600 m³/h
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  DMG MORI NETSERVICE	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoT connector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines
  Performance Package	Performance Package includes Condition Analyzer and Performance Monitor. Ensure more detailed machine overview with innovative monitoring APPs for transparency improvement.
  Special equipment	- Feed drives X-/Y-axis with liquid cooling - Recirculating ballscrew spindle Y-/Z-axis with liquid cooling
  Special equipment	Rotating clear view window, in glued version
  Special equipment	- Eccentric turning technology cycle - Short stroke package - ESR light automated retraction - Interpolation turning cycle - L-measuring probe package for pulling measurement (Z +) of webs and grooves

I like it 0