484,672 reg. members
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

MILLTAP 700 (Reference-Nr. 065216)

Manufacturer: DMG MORI, Vendor: DMG MORI Global Marketing GmbH

Request about this Machine
Price: Asking price


  • Reference number 065216
    Manufacture Year 2015
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Siemens

  • General
    Highly productive compact machining centres; Control: Siemens 840D solutionline
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
    Miscellaneous
    Clamping System MAS 403 - 45°
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Floor space/Weight
    Dimensions (L x W x H) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
    Weight approx. 4100 Kg

  • Spindle speed up to 24,000 r.p.m. BT30 Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
    Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
    Oil and emulsion mist separator Oil- and emulsion mist separator mechanical (including cabin roof)
    Nano package Nano Package Improved Temperature stability Only combinable with 24,000rpm or 10,000rpm high torque spindle possible
    RENISHAW touch probe-Kit for MillTap 700 RENISHAW measuring-Kit for MillTap 700 suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration to
    Signal lamp 4-colour standard Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Chip removal package 40 bar internal coolant suply Chip conveyor Scraper drag type with integrated flat bed sheet discharge height: 600mm Coolant tank 200l Pump capacity external coolant supply 3,5bar @ 20l/min. Additional coolant tank 400 l for Internal coolant supply 40 Bar 20 l/min Cabin roof cool
    Flushing in working room Flushing in working room Manually adjustable coolant nozzles left and right on top cabin side. On / off via M-command. Only possible in combination with chip removal packages with swarf conveyor!
    Spray gun for swarf removal Spray gun for swarf removal (only together with chip removal packages)
    Tropical package Tropical package for 24,000rpm and 10,000rpm high torquespindle For machine environmental temperature up to 50°C including active cooling unit for electrical cabinet, Spindle 24,000rpm and spindle motor for 24,000rpm / 10,000rpm high torque.
    Special equipment Increase the chip ejection at the chip conveyor
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!

Send request

More machines from DMG MORI Global Marketing GmbH