504,114 active members
5,597 visitors online
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

MILLTAP 700 (Reference-Nr. 065232)

Asking price

  • Reference number 065232
    Manufacture Year 2017
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • Siemens

  • General
    High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D Control Siemens 840D solutionline
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-10000/1-10000/1-18000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Floor space/Weight
    Dimensions (L x W x H) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
    Weight approx. 4100 Kg

  • Spindle motor 10.000 RPM Spindle motor 10.000 RPM: - Type of Drive: In line spindle motor (digital controlled AC-Motor) - Speed range: 20 to 10.000 r.p.m - Drive capacity: 16,3KW (max) standard 8,5KW (40% DC) 6KW (100% DC) - Spindle torque: 78 Nm (max.) 48 Nm (40% DC)
    Workpiece loading & unloading system WH 3 MILLTAP Work piece loading and unloading system WH 3 MILLTAP with 6-axis robot and workpiece carrier storing system including additionally: Signal lamp 4-couloured for automation WH3; Automatic blowing station on robot hand; Passive orienting station; clarificati
    Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -100 / + 120 degree Max. load C-axis 100kg Table diameter C-Axis d200mm Inclusive Software package Job Shop and Sinumerik M
    Chip Trolley MillTap design Chip Trolley MillTap design inkl. screen plate and drain valve
    Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
    Clamp pneum 1-circuit integr. swivel rotary table Clamping pneumatic 1-circuit for integrated swivel rotary table including 5/3 way valve including rotary lead through 4-flute for integrated swivel rotary table (Software only with C-G3080 preparation clamping hydraulic or within the automation interfa
    RENISHAW touch probe-Kit for MillTap 700 RENISHAW measuring-Kit for MillTap 700 suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration to
    Preparation 3D quick set Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine with swivel rotary table simultaneous in 5 axis machine configuration. (only with option touch probe)
    Signal lamp 4-colour standard Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Production package band filter ICS 40bar Production package Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gu
    Automation interface door right Automation interface inclusive Automation door right and pre- paration Hydraulic interface
    Gripper system Schunk PGN-plus 80 Gripping device Schunk PGN-plus 80
    15 Laser-cut sheet metal pallet inlays 600x400 Workpiece specific laser-cut sheet metal pallets, dimension 600x400 15 Inlays incl. pallets
    Special equipment Pneumatic clamping device for MillTap 700 with 5 axes table
    DMG MORI Messenger DMG MORI Messenger Installation kit for the connection of one machine.
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!

Send request

More machines from DMG MORI Global Marketing GmbH