541,799 active members*
3,655 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

MILLTAP 700 (Reference-Nr. 065300)

Asking price


  • Reference number 065300
    Manufacture Year 2021
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Siemens

  • General
    High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D Control Siemens 840D solutionline
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
    Floor space/Weight
    Dimensions (L x W x H) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
    Weight approx. 4100 Kg

  • Spindle speed up to 24,000 r.p.m. BT30 Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
    Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -100 / + 120 degree Max. load C-axis 100kg Table diameter C-Axis d200mm Inclusive Software package Job Shop and Sinumerik M
    Lead through for integrated swivel rotary table Rotary lead through for integrated swivel rotary table with torque drives 4- flute, 2x for air, 2x for oil Including fix plate and fast coupling at machine rear side
    Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
    Signal lamp 4-colour standard Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Automation interface door right Automation interface inclusive Automation door right and pre- paration Hydraulic interface
    10 free M-codes for Siemens Free M-Codes (M180-M189) for Siemens 840D potential-free on contacts inside electrical cabinet
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!
    DMG MORI Planning & Control & SME Edition (Cloud) DMG MORI Planning & Control - SME Edition (Cloud)
    Special equipment - Lehmann internal cooling system - COMPACT internal coolant supply 40 bar on chip conveyor: Chip conveyor with 580 l KM volume, with Band filter and attached Flow filter and ICS pump 40 bar, Chip flow 10-20 cm3/min

Send request

More products from DMG MORI Global Marketing GmbH