557,886 active members*
3,797 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

MILLTAP 700 (Reference-Nr. 065319)

Asking price


  • Reference number 065319
    Manufacture Year 2016
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Siemens

  • General
    Highly productive compact machining centres; Control: Siemens 840D solutionline
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Miscellaneous
    Clamping System MAS 403 - 45°
    Floor space/Weight
    Dimensions (L x W x H) 1,65 x 2,95 x 2,55 m
    Weight approx. 4100 Kg

  • Spindle speed up to 24,000 r.p.m. BT30 Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
    Table Table surface 840 x 420 mm
    Maximum load (table centre) 300 Kg
    Slot width 14 mm
    Number of Slots 2
    Clamping grid M 12, 100 x 100 mm
    Tool clamping for BBT 30 (Big+) Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°
    Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
    Nano package Nano package Improved temperature stability Only combinable with 24,000rpm or 10,000rpm high torque spindle. Without SW-Package Mdynamiks (C-H0020)
    RENISHAW touch probe-Kit for MillTap 700 RENISHAW measuring-Kit for MillTap 700 suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration to
    Production package aluminium band filter ICS 40bar Production package aluminium Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Zusatztank 600l Chip conveyor useable for fine aluminium chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Cabin roof; maschi
    Automation interface door right Automation interface inclusive Automation door right and pre- paration Hydraulic interface
    Special equipment - Special clamping hydraulics, 2 clamping circuits - Preparation for dividing head EA510 with direct measuring system - Additional control bar for clamping hydraulics on the real machine side

Send request

More products from DMG MORI Global Marketing GmbH