527,855 active members*
2,186 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

NTX2000/1500SZM (Reference-Nr. 190051)

Asking price


  • Reference number 190051
    Manufacture Year 2013
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Fanuc

  • General
    Turning-milling centre; Control: Control F31iB5

  • (Spindle 1) KITAGAWA 8 Hollow Chuck Unit BB208A621 + Kitagawa Hollow SS1666K21 (Spindle 1) KITAGAWA 8 Hollow Chuck Unit BB208A621 + Kitagawa Hollow SS1666K21
    Chuck top coolant for Main spindle Chuck top coolant for Main spindle This discharges coolant through a coolant nozzle at the top of the Spindle 1 chuck. It is designed to flush chips and to cool the heat in the workpiece caused by cutting. The circuits for the top of the chuck and the in
    Chuck top coolant for Counter spindle Chuck top coolant for Counter spindle This discharges coolant through a coolant nozzle at the top of the Spindle 2 chuck. It is designed to flush chips and to cool the heat in the workpiece caused by cutting. The circuits for the top of the chuck and the
    Super-high-pressure coolant system I/F (7.0 MPa, KNOLL, for 2-path system) Super-high-pressure coolant system I/F (7.0 MPa, KNOLL, for 2-path system) This is an I/F for mounting a super-high-pressure coolant system (separate type). This specification includes coolant piping and electrical parts.
    Interface for Mist collector (duct dia. 200 mm + electric parts, for HVS-300) Mist collector I/F (duct dia. 200 mm + electric parts, for HVS-300) This is the I/F for mounting the mist collector HVS-300 manufactured by Akamatsu Electric Co.,Ltd. This specification includes a Ø200 mm duct and a set of electrical components. The m
    Interface for Bar feeder (EtherNet/IP Interface)with terminal block for power supply Bar feeder I/F (EtherNetI/P I/F)with terminal block for power supply This interface connects a bar feeder to the EtherNetI/P. The bar feeder supplies bar stock to the machine automatically, improving productivity.
    Oil skimmer Oil skimmer Removes oil rising to the surface of the coolant in the coolant tank by attaching to a revolving belt, preventing deterioration of coolant. Suitable for water-soluble coolant. The belt is made of polyurethane. Please avoid using coolant cont
    Tool breakage detection system touch sensor Tool breakage detection system touch sensor The touch sensor detects breakage on the tool tip. When tool breakage is detected, an alarm occurs and the machine operation is halted.
    Machining time stamp Machining Time Stamp Machining time stamp: Displays the 0 numbers of ten programs last executed and their operating time. Program check: Displays the operating time in the comment beside the 0 number when the [INSERT TIME] soft-key is pressed after th
    Signal tower 3 layers (Red, yellow, green) Signal tower 3 layers (Red, yellow, green). This signal tower informs the operator of the machine's status with lights and a buzzer. Red: When an alarm occurs a buzzer sounds and the signal tower light comes on. Yellow: When the program end is executed
    Chuck foot switch (double) for spindle 1, 2 Chuck foot switch (double) for spindle 1, 2 Chuck opening and closing on spindle 1 and 2 are operated by twin chuck footswitch.
    Transformer 95 kVA 95 kVA three phase autotransformer with cabinet CLPB 50F- 1427T18001. Cable lugs of transformer cable might have to be replaced during installation.
    Special equipment KNOLL KF110 / 700 compact filter system 7.0 Mpa additional 1.5 MPa for turret II Counter spindle: KITAGAWA hollow clamping device BB206 + SS1666

Send request

More machines from DMG MORI Global Marketing GmbH