SPRINT 20|8 (Reference-Nr. 080141)

•  
  Reference number 080141

  Manufacture Year 2021

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Lathes
• Type of Machine
  Turret lathes (Capstan) and turret automatics
• Manufacturer
  DMG MORI
• Control
  Fanuc
• Description
  
  

  General
  2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i
  Working area
  Bar diameter max.	20 mm

• Specification
  
  

  Counter spindle collet cleaning	Counter spindle collet cleaning with coolant
  Changing kit from steady to sliding headstock	Changing kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronism
  Additional charge for belt type chip conveyor	Additional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machinin
  Oil mist filter for emulsion or oil	Oil mist filter for emulsion or oil, with mechanical, electrical and software preparation.
  Conveyor belt for finished workpieces	Conveyor belt for finished workpieces outside the machine
  Spindle liner for main spindle	Spindle liner tube for main spindle
  2 x Round clamping collet max D. 20 mm	2 x Round clamping collet type 76-64 F25 145E diameter max 20 mm
  Round guide bushing max. diam.20 mm	Round guide bush type Duenner B260 groove sealed with silicone max. diameter 20 mm
  2 x Collet hold. f. coll. ESX/ER16	2 x Collet holder spindle for collets ESX/ER 16 with cylindrical junction diam.20
  Thread Whirling device ext SL1, 0-15°	Mechanical Thread Whirling device for slide 1 (OD). Adjustable angle 0-15°
  2 x Collet ESX/ER 16	2 x Collet ESX/ER16 min. diameter 0,5 mm max. diameter 10 mm
  Transformer from 400V down to 200V	Transformer from 400V down to 200V 12,5 kVA
  NETservice	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoTconnector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  Fire extinguishing system incl.anti-explosion system	Fire extinguishing system complete with anti-explosion flaps and valve for fume suction shut off. System commissioning in Gildemeister Italiana made by Kraft & Bauer engineers. System start up in customer premises made by Gildemeister Italiana engineers t
  FANUC option for Helical interpolation	FANUC option for helical interpolation with driven tools
  Coolant system for oil Mueller CL2 100bar 20l/min	Additional charge for coolant system Mueller for oil (max 15-22 cST a 40°C) type CL2 100 bar 20l/min, cartridge filter 40 micron, nr 6 independent exits, excluding mechanical, electrical and software interface. (Suitable for non-continuous use)
  Mech.Elect.Softw.prep.high pressure Mueller/Geomar	Mechanical, electrical and software interface for high pressure system Mueller/Geomar
  Special equipment	High frequency spindle for Backworking, Including mechanical, electrical and software interface Set of tools, pliers and reducers for the machining of the workpieces Bone screw without hole

I like it 0