525,677 active members*
2,825 visitors online*
Register for free
Login Register
EMUK Werkzeugmaschinen

Contact

EMUK Werkzeugmaschinen GmbH
Siemensstraáe 24
76316 Malsch
Germany
0049 (0) 7246 1392
0049 (0) 7246 1394

Route planner

Route planner

GLEASON No 14

Asking price


  • Reference number 1058-20012
    Manufacture Year not applicable
    Operation Hours not applicable
  • Metal working machine
  • Gear Cutting Machines
  • BEVEL GEAR MACHINERY
  • Bevel Gear Generators Straight
  • GLEASON
  • max. wheel diameter
    565 mm
    gear width
    100 mm
    max. module
    8,5
    min. module
    1
    total power requirement
    25 kW
    weight of the machine ca.
    7,8 t
    dimensions of the machine ca.
    1420 x 410 x1,8 m

  • Bevel gear generator GLEASON No 14
    Manufacturer: Gleason Works
    Made in: USA

    Specification:

    Capacity
    Cone distance:
    -Max.: 805 mm
    -Min.: 0
    Pitch angle (max.) shafts at 90°: 84°18'
    Pitch angle (min.): 5°42'
    Extreme ratio: 10:1
    Diametral pitch (coarsest): 8.5 Mod.
    Index range: 5 to 100 inclusive and most numbers to 200

    Pitch diameter:
    -Ratio: 10 : 1
    --Face: 25 mm
    --Cone distance: 283 mm
    --Largest pitch diameter of gear: 565 mm
    --Largest pitch diameter of pinion: 57 mm

    --Face: 51 mm
    --Cone distance: 295 mm
    --Largest pitch diameter of gear: 591 mm
    --Largest pitch diameter of pinion: 59 mm

    --Face: 89 mm
    --Cone distance: 305 mm
    --Largest pitch diameter of gear: 610 mm
    --Largest pitch diameter of pinion: 64 mm

    -Ratio: 1 : 1
    --Face: 25 mm
    --Cone distance: 283 mm
    --Largest pitch diameter of gear: 400 mm
    --Largest pitch diameter of pinion: 400 mm

    --Face: 51 mm
    --Cone distance: 295 mm
    --Largest pitch diameter of gear: 419 mm
    --Largest pitch diameter of pinion: 419 mm

    --Face: 89 mm
    --Cone distance: 305 mm
    --Largest pitch diameter of gear: 432 mm
    --Largest pitch diameter of pinion: 432 mm

    Work spindle
    Diameter of taper hole at large end: 100 mm
    Taper per foot: 15 mm
    Depth of taper: 150 mm
    Diameter of hole through: 78 mm
    Spindle nose to machine center: 64 mm to 381 mm

    Speeds and feeds
    Cutter speeds (strokes per minute):
    -60 cycle: 64 to 495
    -50 cycle: 51 to 420
    Feeds (seconds per tooth):
    -60 cycle: 10 to 131
    -50 cycle: 11 to 128

    Electrical equipment
    Main motor: 3 HP, 1800 rpm, 1800 rpm (60 cycle), 1500 rpm (50 cycle)
    Hydraulic pump motor: 1.5 HP, 1200 rpm (60 cycle), 1000 rpm (50 cycle)
    Cutting oil pump motor: 0.5 HP, 3600 rpm (60 cycle), 3000 rpm (50 cycle)

    Miscellaneous
    Floor space: 1420 x 410 mm
    Net weight: 7850 kg


    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from EMUK Werkzeugmaschinen GmbH