Dry powder briquetting machine is also known as dry powder briquetting press machine (http://www.ballpress-machine.com/news/n28.html), which can be used to suppress pulverized coal, iron powder, coking coal, aluminum, iron, tin oxide, carbon powder, coal powder, slag, gypsum, tailings, sludge, kaolin, activated carbon and other powder materials which contain low wate content or no water. Briquetting machine's working condition is bad, and work strength is strong,so daily maintenance is particularly important, and comprehensive inspection for briquetting machine regular is very necessary.
The methods of regular inspection for dry powder briquetting machine:
1. The remove the roller bearing caps, check the bearing wear;
2. Remove the ball press machine reducer inspection lid to check the wear of the gear meshing state;
3. To open the internal cleaning check, and check the wear of the bearings, spiral, triangle lining material mouth parts, replace the bearing grease;
4. Swept into the dust shot down on the briquette machine, in the dismantled process,user should also pay attention to dust, dust invade the mobile parts of the dismantled inspection shall be strictly prohibited;
5. Check foundation bolts, security bolts to release and tighten. There are these details of the ball press machine equipment should pay particular attention to. Such as attention to check the installation screw is loose, fuel, motor current, bearing heating situation, the V-belt walking tank pressure. Oil pressure of the fuel tank should be down to check if the temperature changes, oil spills and other causes of pressure changes should be injected into oil or run back to the correct hydraulic period up to the required working pressure change in operation such as the hydraulic system oil spill should immediately shut down, and then start the repair oil spill.
6. Users should take a look for the lubricant of the dry powder briquetting machine (http://www.ballpress-machine.com/news/n72.html): open gear box gear oil to invade gear 60 mm; reducer and gear oil, raise the amount of intrusion gear for 60 mm; roller bearings every three months to open bearings replace the butter or grease gun oil. Pressure ball machine equipment to operate in accordance with the above steps to ensure the normal operation of the equipment, failure to reduce play a good role.
Welcome to contact or visit Fote Machinery: [email protected].