[eyad267]

Hello All

I have trumpf TC260R which was working ok. suddenly everything stopper and i have the followng msg
Machine Fault 37
Inhibit interr tool change m06

Any Idea about the reason?
Does any body have maintenance manual that i can check this fault in?

Thanks & Reards

[Laserguyfiber]

Hey my quick reply for I work on lasers, I would look at your tool changer, try to move in manual think you should have that somewhere on your controller, Also check your tool in M06 ensure that everything looks good (take it out put it back in) etc..... also reboot would be good.

Let me know more

[eyad267]

Hey my quick reply for I work on lasers, I would look at your tool changer, try to move in manual think you should have that somewhere on your controller, Also check your tool in M06 ensure that everything looks good (take it out put it back in) etc..... also reboot would be good.

Let me know more

Hello,

Thanks for your reply

I had bigger problem in the same machine when i press start pump, it starts for 1 sec and then turns off.
machine shows me only emergency fault.
any ideas?
Thaks