525,356 active members*
2,087 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > 1012 over travel alarm in fanuc series.
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Apr 2017
    Posts
    1

    1012 over travel alarm in fanuc series.

    1012 z +ve end limit pressed alarm is displayed after the z axis is over travelled.

  2. #2
    Quote Originally Posted by udhay View Post
    1012 z +ve end limit pressed alarm is displayed after the z axis is over travelled.
    Sure you fixed it by now but for others Perform a turret restoration and make sure you input the exact tool it happened during event after mode and then reset the machine and it will auto set it’s position properly. This can be avoided if you don’t jog up above the z axis zero line in the middle of a auto operation that was stopped. With the turret upfront it’s an easy mistake to make.

Similar Threads

  1. VM 40 II can't clear 1012 Sams Alarm
    By NovaSp in forum Hitachi Seikis
    Replies: 4
    Last Post: 12-03-2015, 01:15 AM
  2. Replies: 1
    Last Post: 04-07-2015, 08:07 PM
  3. Fanuc 11m OT008 -y axis over travel alarm
    By cjfisher in forum Fanuc
    Replies: 7
    Last Post: 10-10-2013, 10:28 PM
  4. Fanuc Robo Drill 14a 1012,1009 ALARMS
    By treau in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 06-06-2011, 11:01 AM
  5. Fanuc 506 and 507 Over travel Alarm
    By robertox in forum Fanuc
    Replies: 1
    Last Post: 08-28-2010, 11:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •