504,056 active members
4,310 visitors online
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Mazak, Mitsubishi, Mazatrol > 4th axis simultaneous chamfer milling on 640t SQT100MY
Results 1 to 2 of 2
  1. #1

    4th axis simultaneous chamfer milling on 640t SQT100MY

    Hello!

    Quite a beginner here so please be patient. :-)

    I'm trying to do the chamfer on the picture I've attached on my Mazak Super Quickturn 100 MY using Mazatrol programming on the Fusion 640T controller, but the question is: Is it even possible?
    I can easily create the pocket of course but that won't need to involve the C-axis as the chamfer will need.
    People are telling me to use "inside chamfering" but I can't seem to find that unit on the machine, in the manuals or on the internet so I'm starting to think this might not be possible at all - and if so, how would I go about to solve the customers problem?
    Sorry for the Swedish on the controller photo but I seem to be stuck with that.

    I managed to get it working in Fusion 360 and get G-code in just a few minutes, but I'm not sure that will help me ..

    Any help would be greatly appreciated, thank you.

  2. #2

    Re: 4th axis simultaneous chamfer milling on 640t SQT100MY

    Here's a simulation I did in Fusion 360 on what I'm trying to achive. (Fusion simulates the tool spinning but in reality it is the spindle)

    https://www.youtube.com/watch?v=KwF15ycVXgQ

Similar Threads

  1. Five axis simultaneous milling
    By allenp in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 2
    Last Post: 02-04-2019, 05:49 PM
  2. 3 axis milling operation with a chamfer mill?
    By Brian Corwin in forum BobCad-Cam
    Replies: 3
    Last Post: 03-10-2014, 07:16 PM
  3. 4 axis simultaneous milling
    By svarzaru in forum FeatureCAM CAD/CAM
    Replies: 11
    Last Post: 07-05-2012, 05:33 AM
  4. milling hex/w 640t fusion
    By mjjohnson in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 06-18-2011, 02:33 AM
  5. 5-axial simultaneous nut milling
    By woddy-44 in forum PowerMILL
    Replies: 4
    Last Post: 09-03-2009, 11:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •