Before I chuck these up on eBay and see what I get for them I thought I'd try here.
Bought these for a project and they have sat in the workshop for a few years. Circumstances have changed and I'll never use them. Minor surface rust and the bearings could do with new rubber wipers but should all clean up.
4 x 50" fully supported shafts with two bearings per shaft.
4 x 66" fully supported shafts with two bearings per shaft.
Lintech prices without the bearings are $445 for a 48" shaft and $641 for a 66" shaft.
I'm after £50 for a 50" shaft and £55 for a 66" shaft which is a fraction of the new cost. Collection from NN8 and easy access / parking right where they are stored.
Attachment 470536