529,917 active members*
2,054 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Alarm 2010 Fanuc 18-T, Suggestions?
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Oct 2006
    Posts
    15

    Alarm 2010 Fanuc 18-T, Suggestions?

    Daewoo Puma 200S running a Fanuc 18-T, machine ran fine the night before and the next morning we get a 2010 alarm "Spindle Rotation Is Abnormal". Power it off and restart it doesn't help, the hydraulic pump will come on and run about 5 seconds then shuts off. Any suggestions? Thanks!

  2. #2
    Member
    Join Date
    Jul 2005
    Posts
    336

    Re: Alarm 2010 Fanuc 18-T, Suggestions?

    Check incoming voltage. Also check for popped breakers.

  3. #3
    Member
    Join Date
    May 2016
    Posts
    480

    Re: Alarm 2010 Fanuc 18-T, Suggestions?

    Check 24v supply if hydraulics shutting down possibly due to lack of signal that they are on.
    The encoder requires 24v to activate as well

Similar Threads

  1. Replies: 1
    Last Post: 08-18-2020, 08:21 AM
  2. Replies: 5
    Last Post: 11-19-2017, 06:32 PM
  3. 2010 doosan 2000sy fanuc 31i
    By positiverake in forum Daewoo/Doosan
    Replies: 4
    Last Post: 02-14-2017, 10:43 PM
  4. Doosan 2000sy fanuc 31i (2010)
    By positiverake in forum Daewoo/Doosan
    Replies: 10
    Last Post: 02-02-2017, 12:32 AM
  5. 2010 Tool Not Available - Fanuc Om
    By PPM in forum Fanuc
    Replies: 3
    Last Post: 08-24-2005, 09:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •