529,767 active members*
2,971 visitors online*
Register for free
Login
IndustryArena Forum > General Maintenance > Hydraulic Equipment > Amada RG 80 Press Brake Problem
Results 1 to 8 of 8
  1. #1
    Neuer Benutzer
    Join Date
    Mar 2013
    Posts
    4

    Amada RG 80 Press Brake Problem

    My RG 80 Press Brake will not go above 20 tons on a bend. I get no alarms or indication of problem. Has anyone had this issue?

  2. #2
    Registered
    Join Date
    Jun 2006
    Posts
    196

    Re: Amada RG 80 Press Brake Problem

    Check oil levels....

  3. #3
    Registered
    Join Date
    Apr 2008
    Posts
    17

    Re: Amada RG 80 Press Brake Problem

    Check the relief valve on the left end. Also the adjusting bolt that pushes the rod into the distribution valve might have worked loose.
    Hope this helps,
    Tom

  4. #4
    Registered
    Join Date
    Aug 2013
    Posts
    4

    Re: Amada RG 80 Press Brake Problem

    Mister NCT has suggested just what to do, The rod that connects your bar pedal to the valve rides on a bolt with a jam nut. You only want to take up the play, so you should still be able to spin the rod with two fingers.

  5. #5
    Neuer Benutzer
    Join Date
    Mar 2013
    Posts
    4

    Re: Amada RG 80 Press Brake Problem

    The problem was the relief valve. Thank you for your help!!

  6. #6
    you can read the press brake troubleshooting article, it list 17 common problems and the solutions: https://machinemfg.com/17-press-brak...sons-measures/

  7. #7
    Quote Originally Posted by MachineMfg View Post
    you can read the press brake troubleshooting article, it list 17 common problems and the solutions: https://machinemfg.com/17-press-brak...sons-measures/
    Nice article!

  8. #8
    Member
    Join Date
    May 2020
    Posts
    5

    Re: Amada RG 80 Press Brake Problem


Similar Threads

  1. Amada Press Brake Controller problem
    By jamesbond007 in forum Bending, Forging, Extrusion...
    Replies: 4
    Last Post: 12-29-2018, 03:38 AM
  2. Amada Press Brake
    By Footballwr46 in forum Bending, Forging, Extrusion...
    Replies: 4
    Last Post: 12-29-2018, 03:29 AM
  3. Amada Pega 344 Punch Press Clutch/Brake Assy Breakdown
    By tony@sm-w in forum Community Club House
    Replies: 1
    Last Post: 03-15-2012, 12:16 AM
  4. Amada PRESS BRAKE HFT 220-3
    By M7MED in forum Bending, Forging, Extrusion...
    Replies: 4
    Last Post: 12-30-2011, 03:04 AM
  5. Amada brake press controller nc9 r
    By maplesiport in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 07-15-2010, 11:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •