554,071 active members*
3,744 visitors online*
Register for free
IndustryArena Forum > MetalWorking Machines > Bending- and Punching Machines > Amada Vipros 2510C TPP PHNC Board Issue / operator manual needed
Results 1 to 2 of 2
  1. #1

    Join Date
    Mar 2021

    Amada Vipros 2510C TPP PHNC Board Issue / operator manual needed


    We have a Amada Vipros 2510C TPP.

    It was working fine till 5 PM one day. Next day the Hydraulic System wouldn't turn ON automatically throwing error of "Hyd motor thermal trip" & "Stripping".

    We checked the contactor and it was not activating automatically. But if we press the contactor button manually, hyd system would turn ON. We tried resetting it using the red/blue buttons but in vein. After further troubleshooting, we noticed that the DC line which is supposed to give signal to the contactor to turn ON was not giving signal to contactor.

    For stripping, we tried switching OFF the "Strip miss" knob in contol board of machine but still it was throwing stripping error.

    We invited our regular maintenance guy where he noticed one of the red LEDs (LED8) on the main motherboard (PHNC Card) was lit. We noticed as soon as we turn ON the main MCB of machine, it the red LED would turn ON even if we do not switch on the machine.

    Now the issue is, we do not have manual of the machine nor we could find it with all our known resources, people. My maintenance guy says it is very hard to find documentation for the PHNC card/machine.

    I am attaching the PHNC card photo below and also the card number is H0400B-SPHNC-010.

    I am looking for solutions so as to what this RED LED is indicating to me. Like what part of the card is not working which is indicated by this red LED (LED8). You can see the lit LED on the attached image.

    Can anyone help out if you have any circuit diagram of this board / Operators manual for Amada Vipros 2510C ?
    Attached Thumbnails Attached Thumbnails mobo.jpg  

  2. #2
    Join Date
    Nov 2018

    Re: Amada Vipros 2510C TPP PHNC Board Issue / operator manual needed

    Your machine ready

Similar Threads

  1. Amada Vipros 255 PHNC 2091 alarm
    By Fab2spec in forum Other Manufacturing Processes
    Replies: 4
    Last Post: 07-20-2022, 12:46 PM
  2. Fanuc Alarms 1060-1063 Amada Vipros TPP
    By stuffsneak in forum Fanuc
    Replies: 3
    Last Post: 02-01-2022, 11:35 PM
  3. Amada Vipros King 358 PHNC Alarm
    By ehazpmf in forum Fanuc
    Replies: 2
    Last Post: 09-28-2021, 11:13 AM
  4. Need an operator manual for vipros amada
    By Henryndlovu in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 07-22-2021, 07:12 AM
  5. AMADA Vipros 358 king PHNC
    By megaman26 in forum Fanuc
    Replies: 3
    Last Post: 02-13-2017, 06:36 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts